NAMEPLATE AND DECALS
2
PUSH | 4 |
TO STOP | |
P/N EM948630 | 5 |
3
1
MODEL |
|
SERIAL | NO. |
|
|
| DANGER |
|
|
|
|
| Gasoline is highly flammable. |
|
|
|
|
| DO NOT smoke around or near the equipment. |
|
|
|
|
| Fire or explosion could result from fuel vapors or |
| 6 | |
|
| if fuel is spilled on a hot engine! |
|
|
|
|
|
|
|
|
|
|
| P/N 521228 |
|
| |
WARNING
Keep safety grate, guards and doors in place. Shut off engine or electric motor before inspection or maintenance.
Moving parts can cut and crush. SHUT OFF engine or electric motor before placing hands in mixing drum.
To avoid injury, you MUST read and understand operators manual before using this machine.
This machine to be operated by qualified personnel only. Ask for training as needed.
P/N 521229
| WARNING |
|
| Stand clear of dump handle handle |
|
| Is possible. |
|
2 | Wear appropriate dust mask head, hearing and |
|
| Eye protection when operating this equipment. |
|
| Crush hazard area keep hands and fingers | 7 |
| Clear of safety grate at all times. |
Moving parts can crush and cut.
Do not operate with guard removed
Follow lockout procedure before servicing.
P/N 521230
SAFETY
INSTRUCTIONS
1.Read owner’s manual before operating.
2.Keep unauthorized and untrained people away from machine during operation.
3.Make sure all safety devices are in place before this machine is started.
4.Make sure engine is turned off and spark plug wire is disconnected before cleaning the machine.
5.Keep hands and fingers away from moving objects.
6.Do not operate machine in an enclosed area, proper ventilation is required.
7.Never leave machine unattended when operating.
8.Always stop engine and allow engine to cool before adding fuel or oil.
P/N 504713
8
WARNING
Keep safety grate, guards and doors in place. Shut off engine or electric motor before inspection or maintenance.
Moving parts can cut and crush. SHUT OFF engine or electric motor before placing hands in mixing drum.
To avoid injury, you MUST read and understand operators manual before using this machine.
This machine to be operated by qualified personnel only. Ask for training as needed.
P/N 521229
5
page 30 — WM45H/E PLASTER/MORTAR MIXER • operation and parts manual — rev. #0 (09/27/12)
