OPERATION (ELECTRIC)

START-UP ELECTRIC MOTOR

CAUTION

Read and fully understand this manual before

starting or attempting to operate the saw.

Before starting the saw's electric motor make sure that the Safety, General Information, Inspection and Pre-setupsections have been completed and understood. DO NOT

proceed until the above mentioned sections have been completed.

ALWAYS use the water feed system unless special dry cut blades are being used. If dry cutting is required disconnect water pump.

WARNING

ALWAYS wear approved eye and hearing protection before operating the saw.

WARNING

NEVER lift the blade guard while the blade is rotating. The possibility exists of severe bodily harm if fingers or hands come in contact with the rotating saw blade. Wait for the blade to stop rotating before lifting the blade guard.

WARNING

NEVER place hands or feet inside the belt guard or blade guard while the engine is running. ALWAYS shut the engine down before performing any kind of maintenance

WARNING

NEVER place hands and fingers near the cutting blade.The possibility exist of severe bodily harm if hands and fingers come in contact with rotating saw blade.

Figure 19. Material Placement

1.Place the material to be cut (Figure 19) on the conveyor cart against the backstop.

2.Place the mounting plate release/lock lever (Figure 20) in the release position (pull back to release). When releasing the lock, hold on to the mounting plate handle to prevent the plate from rising rapidly, possibly causing the saw to become unstable.Let the plate raise slowly.

WARNING

ALWAYS ensure that the cutting blade has been mounted correctly and that it is raised above the surface you are about to cut.

DANGER

NEVER touch a live power cord with

 

wet hands. The possibility exists of

 

electrical shock, electrocution which

Figure 20. Mounting Plate Release/Lock Lever

could cause severe bodily harm even

 

death.

 

PAGE 26 — MP1 — OPERATION AND PARTS MANUAL — REV. #3 (03/29/10)

Page 25 Page 27
Page 26
Image 26
Multiquip MP1415E, MP1420E, MP1455H manual Operation Electric, START-UP Electric Motor
Page 25 Page 27

MP1420E, MP1415E, MP1455H specifications

The Multiquip MP1455H, MP1415E, and MP1420E are part of Multiquip’s line of high-performance concrete and masonry saws, designed to cater to the diverse needs of the construction industry. Each model offers unique features and technologies tailored to enhance productivity, efficiency, and user comfort.

Starting with the MP1455H, this saw is powered by a robust Honda GX390 engine, delivering reliable performance for heavy-duty cutting tasks. It boasts a 14-inch cutting blade capacity, enabling users to cut through various materials with ease. The MP1455H is equipped with a user-friendly depth control system, allowing for precise cuts and adjustments on the fly. Its rugged frame is constructed with durable materials, ensuring longevity even in the most challenging job site conditions.

The MP1415E is an electric-powered saw designed for quieter operation without compromising power. It features a 15-inch blade capacity, making it suitable for a variety of applications such as asphalt, concrete, and masonry. This model is particularly appreciated for its low vibration technology, significantly reducing operator fatigue. Additionally, the MP1415E includes an integrated water system that promotes clean cutting and minimizes dust, promoting a healthier work environment.

The MP1420E rounds out the lineup with enhanced features for improved power and efficiency. Like the MP1415E, this model is electric-powered, but it accommodates a 20-inch blade, making it ideal for larger cutting tasks. The saw is designed with a heavy-duty steel frame that provides stability and minimizes flex during operation. Featuring advanced electronic controls, the MP1420E allows users to monitor performance metrics easily, making it suitable for both experienced and novice operators.

All three models incorporate advanced cooling systems to prolong blade life and maintain optimal performance. Their compact designs ensure ease of transport, and they are suitable for both indoor and outdoor applications, providing versatility in various job sites.

In summary, the Multiquip MP1455H, MP1415E, and MP1420E concrete and masonry saws are engineered to meet the rigorous demands of the construction industry. With powerful engines, user-friendly features, and advanced technologies, these saws deliver exceptional performance, reliability, and ease of use.
Top Page Image Contents