Multiquip operation manual MT-62HS Specifications

		MT-62HS — SPECIFICATIONS
Table 1. MT-62HS Rammer Specifications
MODEL		MT-62HS U.S. (metric)
Overall Height		40.6 in. (1,030 mm)
Overall Width		13.8 in. (350 mm)
Over Length		27.6 in. (700 mm)
Shoe Size		10.8 x 13.4 in. (274 x 340 mm)
Blows/minute		600 ~ 690
Travel Speed		36 ft./min. (11 meters/min.)
Stroke (Jump Height)		2.75 in. (70 mm)
Impact Force		1,650 ~ 2,250 lbs./blow
		(750 ~ 1,000 Kg/blow)
Compacted Area		1,944 ft2/hr (181 m2/hr)
Clutch		Automatic Centrifugal
Operating Weight		123 lbs. (56.0 Kg)
Weight without fuel		119 lbs. (54 Kg)
Fuel Tank Capacity		2.1 qt. (2 liters)
Table 2. ROBIN EC-08HS Engine Specifications
	Model	ROBIN EC08HS
	Type	Air-Cooled 2 Stroke Gasoline Engine
	Bore x Stroke	1-31/32 in. x 1-7/32 in. ( 50 mm x 40 mm)
	Piston Displacement	5.12 cu.in. (78.5 cc)
	Compression Ratio	6.5 : 1
	Continuous Rated Output	1.8 hp/ 4,000 rpm
Engine	Max. Output	3.3 hp/5,500 rpm
	Max. Torque	3.7 ft-lb/3,600 rpm (0.551 Kg-m/3,600 rpm)
	Cooling System	Air-Cooled By Fan
	Lubrication System	Fuel-Lubrication Oil Spraying System
	Fuel Consumption	0.84 lb/hp/h (2.2hp/4,500 rpm)
	Fuel	Gasoline
	Spark Plug	NGK B-6HS
	Starting System	Recoil Starter
Dimension (L x W x H)		11 x 9.75 x 12 in.
		280 x 248 x 305 (mm.)
Dry Net Weight		17 lbs. (7.7 Kg.)

NOTE	Specifications are general and are subject to change without notice. If exact
	measurements are required, equipment should be weighed and measured.

PAGE 12 — MT-62HS — PARTS & OPERATION MANUAL — REV. #2 (12/15/03)