MVH-702DRSC — REMOTE CONTROL COMPONENTS

CONTROL UNIT (BODY)

Figure 4 illustrates the location of the major components for the Remote Control on the body of the machine. The function of each component is described below:

1.Control Unit – Controls engine start/stop and hydraulic valve unit according to the operation signals from the transmitter. In addition, it also controls the following monitoring lights:

Receiving Failure Light

Oil Pressure (Engine) Failure Light

Regulator Failure Light

E/G Overheat Light

2. Receiver and Receiving Lamp – Receives infra-red signals from the transmitter indicated by the flashing light on the receiving lamp.

3. Main Switch (Battery Master Switch) –Battery power switch for control unit on body of machine.

4.Valve Unit – Electromagnetic and hydraulic valve; controls traveling speed and direction.

5.Cell/Crank Start Switch – Selects electric (cell) start for normal operation or manual (crank) start for emergencies.

6.Receiving Failure Light - Lights to indicate that the signal from the transmitter is not received. The remote control operation is restricted to a narrower area , the farther you are from the machine. When this light is on, plate vibration will automatically stop but the engine will continue running.

7.Oil Pressure (Engine) Failure Light –Lights to indicate that the engine oil is low or the hydraulic oil pump is not functioning properly. When this light is on, the engine will automatically stop.

8. Regulator Failure Light – Lights to indicate that the alternator and regulator are not functioning properly.When this light is on, the machine is still operating. Check alternator and regulator after operation.

9.E/G Overheat Light - Lights to indicate engine overheat. If the engine is continuously overloaded or if the air element is clogged due to excessive dust, the engine will overheat. To correct this, run the machine without vibration for about 5 minutes or stop the engine to clean air element. If this is not done, the machine will automatically stop vibration to cool the engine, and will not start again until the engine temperature reaches acceptable level.

10.Monitoring Lamp – Depending on which numbered lamps light up, indicates the status of the machine (Figure 5).

MONITOR LAMP

1 2 3 4

5 6 7 8

910 11 12

Figure 5. Monitor Lamp

1 is lighted: Main Switch is on.

9, 10, and 12 are lighted: Engine start by cell motor.

9 and 10 are lighted: Engine start by crank handle.

5 and 8 are lighted: Transmitter start switch is turned on. Shortly after the transmitter start switch is turned

on, all lamps turn off.

6 and 8 are lighted:Transmitter vibration start switch is on.

7, 8, and 12 are lighted: Transmitter start switch is turned off.

See Figure 6 for correlation of monitor lamp and joystick lever.

Figure 6. Correlation of Monitor Lamp

and Joystick Lever

MQ-MIKASA MVH-702DRSC COMPACTOR — PARTS & OPERATION MANUAL — REV. #1 (12/17/03) — PAGE 17

Page 16 Page 18
Page 17
Image 17
Multiquip manual MVH-702DRSC Remote Control Components, Control Unit Body
Page 16 Page 18

MVH-702DRSC specifications

The Multiquip MVH-702DRSC is a state-of-the-art, reversible plate compactor that has been designed for maximum performance and efficiency in soil and asphalt compaction. Renowned for its durability and user-friendly features, the MVH-702DRSC is an ideal choice for a wide variety of construction and landscaping applications.

One of the standout features of the MVH-702DRSC is its powerful 4.5 hp engine, ensuring optimal performance in tough working conditions. The engine is not only reliable, but it also provides excellent fuel efficiency, allowing for extended operation without the need for frequent refueling. The compact design of the MVH-702DRSC enables it to easily navigate tighter job sites, making it an exceptional choice for residential and commercial projects alike.

Another remarkable characteristic of this plate compactor is its advanced vibration technology. With a maximum centrifugal force of 3,300 pounds, the MVH-702DRSC ensures efficient compaction of granular and cohesive soils. It features a wide base plate that is specifically designed to provide a high degree of stability and effective material displacement, which results in a well-compacted surface. The ability to reverse also allows operators to perform tasks quickly and effectively, eliminating the need to reposition the machine for optimal operation.

User comfort and control are prioritized in the design of the MVH-702DRSC. The ergonomic handle is adjustable and designed to reduce operator fatigue, allowing for extended periods of use without discomfort. The machine also incorporates a sophisticated splash guard, which helps to keep the engine and components clean, an important aspect that contributes to longevity and performance.

Moreover, the MVH-702DRSC is equipped with a protective frame that safeguards critical components during operation, minimizing maintenance requirements over time. The compact and robust design assures ease of transport, as it can fit in small trailers or truck beds, enabling contractors to easily move it between job sites.

In conclusion, the Multiquip MVH-702DRSC is a high-performing, versatile reversible plate compactor that combines power, efficiency, and user-friendly features. From its durable construction to its advanced vibration technology, it is designed to meet the rigorous demands of the construction industry while ensuring comfort and ease of use for operators. Ideal for compacting soil and asphalt, the MVH-702DRSC is a reliable choice for professionals seeking a robust compaction solution.
Top Page Image Contents