Manuals / Multiquip / Kitchen Appliance / Trash Compactor

Multiquip manual MVH-702DRSC Operation, Before Operation

Models: MVH-702DRSC

1 58
Download 58 pages 4.15 Kb
Page 22
Image 22

BEFORE OPERATION

1.Familiarize yourself with the operating and control elements of the machine and the working environment.This includes obstacles in the working area, bearing capacity of the ground and the necessary safety provisions.

2. Understand the geographical features and regulations of the job site.

3. Inspect caution decals and replace missing/worn-out ones.

4.Check nuts and bolts and tighten if necessary.Loose threads may cause damage to the machine when vibrating.

5.Make sure lifting hook, shock mounts and control parts are all working properly. Do not start the machine if any failure is noted.

6.Wipe off any dust from the receiving lamp of the machine.

Checking Engine Oil Level

CAUTION :

DO NOT overfill oil tank. This could cause oil leaks and sluggish operation. Clean cap and surrounding area before opening to prevent dirt from entering tank.

1.Make sure that the machine is situated in a flat surface so that level measurements will be accurate.

2.Open the front cover of the machine by moving the lever to the “OPEN” position then slowly lifting the hook on the cover (Figure 12).

Pull slowly to open

Move to the OPEN

position

 

Figure 12. Opening the Front Cover

3.Pull out the dipstick from the oil tank (Figure 13). Check the oil level and refill if necessary.For selection of proper grade of diesel engine oil, refer to Table 3 in Troubleshooting section.

MVH-702DRSC — OPERATION

Oil Tank

Fuel

Tank

Figure 13. Oil and Fuel Tanks

CAUTION :

Lower grade or lower volume of engine oil can cause engine burns. The built in sensor continues to run for about 3 minutes after sensing lack of oil. Make sure that oil level is sufficient before starting operation

Checking Engine Oil Level

1.Unscrew the fuel tank cap. See Figure 13 for location.

2.Visually inspect the fuel level and refill if necessary.

DANGER :

Do not refill with fuel in poorly ventilated environment. When refueling, make sure the engine is shut down and that there is no possibility of starting a fire.

CAUTION :

.

Wipe off fuel spills immediately when overfilled.

Checking The Hydraulic System

1.Check the oil tank level gauge (Figure 14). Oil level should be at the upper indication of the gauge.

2.Check the surroundings of the oil tank, hydraulic pump and motor for oil leakage.

3.After inspection, close the front cover slowly.

DANGER :

Always keep hands and fingers away from pinch points. Do not allow anyone to reach in on dangerous sections of the machine to avoid any accidents.

PAGE 22 — MQ-MIKASA MVH-702DRSC COMPACTOR — PARTS & OPERATION MANUAL — REV. #1 (12/17/03)

Page 21 Page 23
Page 22
Image 22
Multiquip manual MVH-702DRSC Operation, Before Operation
Page 21 Page 23

MVH-702DRSC specifications

The Multiquip MVH-702DRSC is a state-of-the-art, reversible plate compactor that has been designed for maximum performance and efficiency in soil and asphalt compaction. Renowned for its durability and user-friendly features, the MVH-702DRSC is an ideal choice for a wide variety of construction and landscaping applications.

One of the standout features of the MVH-702DRSC is its powerful 4.5 hp engine, ensuring optimal performance in tough working conditions. The engine is not only reliable, but it also provides excellent fuel efficiency, allowing for extended operation without the need for frequent refueling. The compact design of the MVH-702DRSC enables it to easily navigate tighter job sites, making it an exceptional choice for residential and commercial projects alike.

Another remarkable characteristic of this plate compactor is its advanced vibration technology. With a maximum centrifugal force of 3,300 pounds, the MVH-702DRSC ensures efficient compaction of granular and cohesive soils. It features a wide base plate that is specifically designed to provide a high degree of stability and effective material displacement, which results in a well-compacted surface. The ability to reverse also allows operators to perform tasks quickly and effectively, eliminating the need to reposition the machine for optimal operation.

User comfort and control are prioritized in the design of the MVH-702DRSC. The ergonomic handle is adjustable and designed to reduce operator fatigue, allowing for extended periods of use without discomfort. The machine also incorporates a sophisticated splash guard, which helps to keep the engine and components clean, an important aspect that contributes to longevity and performance.

Moreover, the MVH-702DRSC is equipped with a protective frame that safeguards critical components during operation, minimizing maintenance requirements over time. The compact and robust design assures ease of transport, as it can fit in small trailers or truck beds, enabling contractors to easily move it between job sites.

In conclusion, the Multiquip MVH-702DRSC is a high-performing, versatile reversible plate compactor that combines power, efficiency, and user-friendly features. From its durable construction to its advanced vibration technology, it is designed to meet the rigorous demands of the construction industry while ensuring comfort and ease of use for operators. Ideal for compacting soil and asphalt, the MVH-702DRSC is a reliable choice for professionals seeking a robust compaction solution.