Operation:

5.7Switching off the machine

1.Move the switches „FL“, „FR“, „V“ and „E“ to their central position / switch off (Fig. 22).

2.Press the Start/Stop switch „S“ to the right and hold there until the engine comes to a complete standstill.

3.Actuate the emergency stop switch „N“ by pressing down. (Fig. 22)

FL

V

FR

E

N

S

22

 

 

 

 

Note:

After switching off the machine, the ignition key must be removed.

6.0 Manual control

Note:

All safety conditions from Section 5.0 Operation with remote control must be observed when working with manual control!

6.1Starting process

When starting the engine, the starting conditions of the engine manufacturer must be observed.

1.Fill with fuel (see Maintenance section 9.06)

2.Move the throttle lever to position „I“ (Fig. 17).

3.All switching levers must be in the neutral position (Fig. 18).

4.Turn the ignition switch to the position „I“ (Fig. 24). Oil pressure warning light „ÖK“ and battery charge indicator light „LK“ light up.

6.2Travel operation

Push both travel levers „SL“ and „SR“ to the front.

The machine begins to travel forwards. For reverse travel, pull both travel levers backwards. To steer to the side, the travel levers are moved in the opposite directions (turning on the spot).

6.3High speed

Push the switch lever „SE“ forwards. The functional is the same as for the work mode..

Note:

The machine travels twice as fast in „high speed“ mode as in the working mode!

26

Page 26
Image 26
Multiquip P33/24 HHMR Manual control, Switching off the machine, Starting process, Travel operation, High speed