Operation:
7.0 Jump start device (FSE)
Note:
12 V system!!!
1. | Connect the jump start battery to the „+“ terminal and | 27 |
| the „+“ terminal of the FSE to the machine. | |
|
| |
|
| |
2. | Connect the jump start battery to the |
|
| the |
|
3. | Start the machine (page 26, section 6.1) Start |
|
| procedure |
|
4. | Disconnect the battery again in the reverse order. |
|
Remark:
In order to avoid danger when connecting and disconnecting the battery,
connect the „+“ terminal fi rst and disconnect it last. The
8.0 Loading and transport
•To load the roller using hoisting gear, there is a central transport eye bolt „B“ in the middle of the roller (Fig. 28).
•The roller can also be loaded independently by being driven up a suitable loading ramp.
28
O 
O
Note:
•Only loading ramps with suffi cient loading capacity and static stability must be used which exclude any possibility of personal injury.
•To lash the roller, always use shackles which are fastened to the transportation eye bolts „O“ (at the front and back of the central web).
•The roller must be lashed in such a way that it is secured against tipping over, slipping or rolling away.
•Do not walk or stand under suspended loads.
28
