Multiquip P33/24 HHMR operation manual Check engine oil level, Checking the hydraulic oil level

Maintenance:

9.04 Check engine oil level

Remark:

Park the machine on an even, load-bearing surface in such a way that it is horizontal.

•Pull out the oil dip stick „MS“ and wipe off with a lint-free cloth (Fig. 29).

•Insert the oil dip stick as far as it will go and pull out again.

•The oil level must be between the two marks.

•If the oil level is below the bottom mark, top up with oil immediately.

For suitable oil types, see the Hatz 2G40 manual!

29

E

9.05 Checking the hydraulic oil level

Remark:

Park the machine on an even, load-bearing surface in such a way that it is horizontal.

•Check the hydraulic oil level at the oil sight glass under the engine hood.

•Only check the oil level when the engine is cold. The hydraulic oil should come up to the middle of the sight glass.

•If necessary, top up with hydraulic oil.

Recommended oil types: Mobil HPL 46, Texaco Rando HD-C. Equivalent oil types from other manufacturers can be used.

Remark:

If it is discovered during the daily oil level check that there is hydraulic oil missing, Check all units, pipelines and houses immediately for leaks.

9.06 Checking the fuel level

iDanger Danger of fire!

When working with the fuel system, no naked fl ames,

no smoking. Do not refuel in enclosed areas. Do not breathe in fuel fumes.

Note:

Contaminated fuel can lead to the failure of or damage to the engine. 30

If necessary, top up fuel through a sieve fi lter.

Clean the area surrounding the fi lling hole and refuel. Fuel: See the Hatz 2G40 operating manual!

(Annex)

31