basic engine

Figure 3. Engine Controls and Components

iNITIAL SERVICING

The engine (See Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions and details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat.

1.Fuel Filler Cap — Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

DANGER

Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill, DO NOT attempt to start the engine until the fuel residue has been completely wiped up and the area surrounding the engine is dry.

2.Throttle Lever — Used to adjust engine RPM speed (lever advanced forward - SLOW, lever back toward operator - FAST).

3.Engine ON/OFF Switch — ON position permits engine starting, OFF position stops engine operations.

4.Recoil Starter (pull rope) — Manual-starting method. Pull the starter grip until resistance is felt, then pull briskly and smoothly.

5.Fuel Valve Lever — OPEN to let fuel flow. CLOSE to stop the flow of fuel.

6.Air Cleaner — Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element.

NOTICE

Operating the engine without an air filter, with a damaged air filter, or a filter in need of replacement will allow dirt to enter the engine, causing rapid engine wear.

WARNING

Engine components can generate extreme heat . To prevent bur ns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER operate the engine with the muffler removed.

7.Spark Plug — Provides spark to the ignition system. Set spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch). Clean spark plug once a week.

8.Muffler — Used to reduce noise and emissions.

9.Fuel Tank — Holds unleaded gasoline. For additional information refer to engine owner's manual.

page 14 —QP305SLT/QPT305SLT CENTRIFUGAL PUMP • operation and parts manual — rev. #1 (10/11/10)

Page 13 Page 15
Page 14
Image 14
Multiquip QP305SLT, QPT305SLT manual Basic engine, INITIAL Servicing
Page 13 Page 15

QPT305SLT, QP305SLT specifications

The Multiquip QPT305SLT is a state-of-the-art portable generator designed for construction sites, outdoor events, and emergency power needs. Known for its robust performance and reliability, the QPT305SLT is a standout choice for those requiring a dependable power source in demanding environments.

One of the main features of the QPT305SLT is its powerful engine. Equipped with a high-efficiency, 305 cc engine, the generator provides an output of up to 3,000 watts, making it suitable for various applications, from powering tools to providing backup energy during outages. The engine's design focuses on fuel efficiency and low emissions, aligning with current environmental standards while ensuring long operating times between refueling.

In terms of technology, the QPT305SLT incorporates advanced noise reduction systems, allowing it to operate at lower decibel levels, making it ideal for use in residential areas or noise-sensitive environments. An intelligent monitor system provides real-time data on voltage and frequency, ensuring that users are always aware of their power situation and can make informed decisions about their energy needs.

The QPT305SLT also features an integrated inverter, which helps deliver clean and stable power suitable for sensitive electronic devices. This feature is particularly beneficial for users needing to power computers, communication equipment, or medical devices. The inverter technology not only enhances the quality of the output power but also improves fuel efficiency.

Durability is another characteristic that sets the QPT305SLT apart. The generator is built with a heavy-duty frame and protective features to withstand the rigors of outdoor use. Additionally, it includes a maintenance-friendly design, making service checks and repairs straightforward.

Portability is a significant advantage of the QPT305SLT. With a lightweight construction and ergonomic handle design, moving the generator from one location to another is easy, making it an excellent choice for contractors and event organizers alike.

Overall, the Multiquip QPT305SLT combines power, efficiency, and user-friendly features, establishing itself as a reliable option for those in need of versatile and portable power solutions. Whether for job sites, outdoor activities, or emergency backups, this generator is engineered to meet the highest standards of performance and durability.
Top Page Image Contents