Safety Information

■NEVER run engine without air cleaner. Severe engine damage may occur.

■ALWAYS ensure pump is on level ground before use.

■NEVER pump volatile, explosive, flammable or low flash point fluids. These fluids could ignite or explode. NEVER pump corrosive chemicals or water containing toxic substances. These fluids could create serious health and environmental hazards. Contact local authorities for assistance.

■NEVER open the priming plug when pump is hot. Hot water inside could be pressurized much like the radiator of an automobile. Allow pump to cool to the touch before loosening plug.The possibility exists of scalding, resulting in severe bodily harm.

■NEVER block or restrict flow from discharge hose. Remove kinks from discharge line before starting pump. Operation with a blocked discharge line can cause water inside pump to overheat.

■ALWAYS fill the pump casing with water before starting the engine. Failure to maintain water inside the pump housing will cause severe damage to the pump and mechanical seal.

■In winter drain water from pump housing to prevent freezing.

■NEVER tamper with the factory setting of the engine governor. Personal injury and equipment damage can result if operating in speed ranges above the maximum allowable.

LOADING AND UNLOADING

■Before lifting, make sure that equipment parts (hook and vibration insulator) are not damaged and screws are not loosened or lost.

■ALWAYS make sure crane or lifting device has been properly secured to the lifting bail (hook) of the equipment.

■NEVER lift the equipment while the engine is running.

■Use adequate lifting cable (wire or rope) of sufficient strength.

■Use one point suspension hook and lift straight upwards.

■NEVER allow any person or animal to stand underneath the equipment while lifting.

■DO NOT lift machine to unnecessary heights.

TRANSPORTING

„ALWAYS shutdown engine before transporting.

„Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

„ALWAYS tie down the equipment during transport by securing the equipment with rope.

page 8 —QP305SLT/QPT305SLT CENTRIFUGAL PUMP • operation and parts manual — rev. #1 (10/11/10)

Page 7 Page 9
Page 8
Image 8
Multiquip QP305SLT, QPT305SLT manual Safety Information, Always ensure pump is on level ground before use
Page 7 Page 9

QPT305SLT, QP305SLT specifications

The Multiquip QPT305SLT is a state-of-the-art portable generator designed for construction sites, outdoor events, and emergency power needs. Known for its robust performance and reliability, the QPT305SLT is a standout choice for those requiring a dependable power source in demanding environments.

One of the main features of the QPT305SLT is its powerful engine. Equipped with a high-efficiency, 305 cc engine, the generator provides an output of up to 3,000 watts, making it suitable for various applications, from powering tools to providing backup energy during outages. The engine's design focuses on fuel efficiency and low emissions, aligning with current environmental standards while ensuring long operating times between refueling.

In terms of technology, the QPT305SLT incorporates advanced noise reduction systems, allowing it to operate at lower decibel levels, making it ideal for use in residential areas or noise-sensitive environments. An intelligent monitor system provides real-time data on voltage and frequency, ensuring that users are always aware of their power situation and can make informed decisions about their energy needs.

The QPT305SLT also features an integrated inverter, which helps deliver clean and stable power suitable for sensitive electronic devices. This feature is particularly beneficial for users needing to power computers, communication equipment, or medical devices. The inverter technology not only enhances the quality of the output power but also improves fuel efficiency.

Durability is another characteristic that sets the QPT305SLT apart. The generator is built with a heavy-duty frame and protective features to withstand the rigors of outdoor use. Additionally, it includes a maintenance-friendly design, making service checks and repairs straightforward.

Portability is a significant advantage of the QPT305SLT. With a lightweight construction and ergonomic handle design, moving the generator from one location to another is easy, making it an excellent choice for contractors and event organizers alike.

Overall, the Multiquip QPT305SLT combines power, efficiency, and user-friendly features, establishing itself as a reliable option for those in need of versatile and portable power solutions. Whether for job sites, outdoor activities, or emergency backups, this generator is engineered to meet the highest standards of performance and durability.
Top Page Image Contents