S-500 SERIES SUB. PUMP — CLEAN-UP
Pump Shut-Down/Clean-up
1.Remove the power from the pump by turning off the circuit breaker or switch that provides power to the pump. Remem- bertomakesurethathandsaredry(notwet),andfeetarenot standing in water when removing disconnecting power from thepump.
2.Usingtheliftingrope,liftthepumpupfromitscurrentposition. Remove the discharge hose from the discharge port on the pump.
3.Remove all power cables and float switches from the control box. Place cables and float switches in a suitable container where they will not get damaged.
4.Ifthepumpwasusedtopumpmud,gritorsilt,flush vigorously with clean water.
5.Removethepumpfromthewater.Wipeoffany mudordebris that might have attached itself to the pump.
6.Store pump in a clean dry place away from dirt and debris.
PAGE 18 —
