digital controller
11
14
13
12 
1
2
4 
5
3
15
10 9 8 7
6
Figure 9. Digital Controller
Refer to Figure 9 for location of controls and indicators.
1.STATUS LED — Indicates status of the controller. Lights green when the controller is running.
NAVIGATIONS BUTTONS
2.ARROW UP Button — Press button to scroll up through the status menus or programming prompts.
3.ARROW DOWN Button — Press button to scroll down through the status menus or programming prompts.
4.MENU Button — Press button to jump to menu/sub- menu page or escape from any dialog window.
5.ENTER Button — Press button to confirm a value or open a value adjustment within setting dialogs.
CONTEXT BUTTONS
6.MODE Button — Press button to jump to the controller mode window.
7.HISTORY Button — Press button to jump to history screen.
8.ALARM Button — Press button to jump to alarm list
9.GCB (Generator Circuit Breaker) CONTROL Button — Press button to close/open GCB.
10.MCB CONTROL Button — Not functional in this application.
CONTROL BUTTONS
11.START Button — Press button to go idle mode (about an hour) then generator starts. A second press will bypass idle mode and generator goes to full speed immediately.
12.STOP Button — Press button to cool the generator for about 5 minutes then the generator will stop. A second press will bypass cool down and will stop the generator immediately.
NOTICE
START and STOP buttons work in MAN (manual) or SEM
13.FAULT RESET Button — Press button to acknowledge faults and alarms (active only in Alarm screen).
14.HORN RESET Button — Press button to deactivate the horn (audible alarm).
15.DISPLAY — Shows menu, measurements, setpoints, alarm list, history, and help/others screens.
NOTICE
For more detailed operating and programming information on the digital controller, refer to the InteliVision 5™ Controller User's Guide.
SG1400c3 studio generator • operation manual — rev. #0 (10/05/11) — page 27
