Multiquip manual SP2S13H20A Saw Major Components

MAJOR COMPONENTS

Figure 3. SP2S13H20A Saw Major Components

Figure 3 displays the location of the various operational control features of the SP2S13H20A pavement saw. Features are dependent on the specific model saw selected.The function of each console component or indicator is explained below:

1. Handle Bars – Used to steer and push the SP2S13H20A saw during cutting operations. The handle can be folded down for transportation.

2.Forward/Reverse Speed Lever – Controls forward and reverse speeds for self-propelled operation. Provides positive neutral for engine start. ALWAYS place transmission engage/disengage lever in the engage position before setting speed lever.

3.Raise/Lower Crank Handle – Physically orients saw (raises or lowers) depending on cranking direction (CW or CCW). Turning the handle clockwise lowers the saw, turning the saw counter-clockwiseraises the saw.

4. Transmission Engage/Disengage Lever – Forward locking position engages transmission. Rear Locking position disengages transmission from rear axle and permits "free wheeling".

5. WaterTank – A 5-gallon capacity water tank provides water for the saw blade during wet cutting applications.

6. Water ON/OFF Valve – ON position opens valve and permits water to flow from source through saw water hose. OFF position closes valve and halts the flow of water.

7. Hydraulic Drive Transmission - Controls the saw's forward and reverse movement by using the forward/ reverse speed lever.

8. Saw Blade Guard – Covers the saw blade during cutting operations & allows water hoses to be connected to the cover for wet cutting.

9. Belt Cover – Covers the drive shaft belt, engine pulley and the hydraulic transmission belt.

10. Drive-Shaft Pulley Guard – Covers the drive shaft pulley.

11. Rear Wheels – Allows the saw to be rolled across ground. The rear wheels are turned by the spline gears attached to the hydraulic transmission system.

12. Pointer Arm – Front pointer wheel assists in straight tracking. Lifts up for storage and pivots down for use.

13. Lifting Bale Kit – Allows for easy lifting and transporting the SP2S13H20A saw.

PAGE 14 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)