Multiquip manual ST-2005 SERIES SUB. PUMP - SPECIFICATIONS, Specifications

ST-2005 SERIES SUB. PUMP — SPECIFICATIONS

TABLE 1. SPECIFICATIONS

Model	ST-2005T		ST-2005C	ST-2005S	ST-2005CUL	ST-2005TCUL
Type	Submersible Trash		Centrifugal	Centrifugal	Centrifugal	Submersible Trash
	Pump		Submersible Pump	Submersible Pump	Submersible Pump	Pump
Impeller	Cast Iron Ductile		Cast Iron Ductile	Stainless Steel	Cast Iron Ductile	Cast Iron Ductile
Suction & Discharge Size	2.00 in. (51 mm)		2.00 in. (51 mm)	2.00 in. (51 mm)	2.00 in. (51 mm)	2.00 in. (51 mm)
Maximum Pumping Capacity	72 gallons/minute		85 gallons/minute	70 gallons/minute	85 gallons/minute	72 gallons/minute
	(273 liters/minute)		(322 liters/minute)	(265 liters/minute)	(322 liters/minute)	(273 liters/minute)
Max. Solids Diameter	1.00 in. (25 mm.)		N/A	N/A	N/A	1.00 in. (25 mm.)
Max Head	34 ft. (10.3 meters)		42 ft (12.8 meters)	36 ft. (10.9 meters)	42 ft (12.8 meters	34 ft. (10.3 meters)
Power	0.5 HP (0.37kw)		0.5 HP (0.37kw)	0.5 HP (0.37kw)	0.5 HP (0.37kw	0.5 HP (0.37kw)
Voltage Phase	1Ø 115V		1Ø 115V	1Ø 115V	1Ø 115V	1Ø 115V
Starting Amps		25	41	17	41		25
Running Amps	6.2		8	6.7	8	6.2
Control Box Required	NO (Note 3)		NO (Note 3)	NO (Note 3)	NO (Note 3)	NO (Note 3)
Thermal Overlaod Protection	YES		YES	YES	YES	YES
Rotation	CCW (Note 1)		CCW (Note 1)	CCW (Note 1)	CCW (Note 1)	CCW (Note 1)
Mechanical Oil seal Capacity	180 cc. (Note 2)		150 cc. (Note 2)	230 cc. (Note 2)	180 cc. (Note 2)	180 cc. (Note 2)
Check Frequency	Monthly (300 hrs.)		Monthly (300 hrs.)	Monthly (300 hrs.)	Monthly (300 hrs.)	Monthly (300 hrs.)
RMP (Speed)	3550 +/- 30		3550 +/- 30	3550 +/- 30	3550 +/- 30	3550 +/- 30
Power Cable Length	25 FT.	(7.6 cm.)	25 FT. (7.6 cm.)	25 FT. (7.6 cm.)	25 FT. (7.6 cm.)	25 FT.	(7.6 cm.)
Dry Net weight	57 lbs.	(26 Kg.)	38 lbs. ( 17 Kg.)	39 lbs. (18 Kg.)	38 lbs. ( 17 Kg.)	57 lbs.	(26 Kg.)

1.Motor Rotation – Upon start-up, the pump "kicks" in the opposite direction of motor rotation. The correct rotation is counterclockwise (CCW) as viewed from the impeller end of the pump.

2.Mechanical Oil Seal – Use a good grade 10 weight non-detergent hydraulic oil (i.e. Shell Turbo 32 or equivalent).Fill oil cavity 75% to 85% full (allow air space for expansion).

3.Control Box - Control box (Table 2) may be required for certain pumping applications.

Table 2. Control Box Specifications

Model No.	VoltageType	UL/CSA	Thermal	Float
			Overload	Switch
		Listed
			Protection	Capability
CB3	115 VAC, 60 Hz Single-	YES	YES	YES
	Phase

ST-2005 SERIES SUBMERSIBLE PUMPS — OPERATION & PARTS MANUAL — REV. #3 (09/21/04) — PAGE 9