ST-2005 SERIES SUB. PUMP — COMPONENTS

Figure 2. Submersible Pump Components

Figures 2 shows the location of the basic components, for the ST-2005 series submersible pumps. Listed below is a brief explanation of each component.

1.Strainer Base – This strainer base is made of stainless steel which is resistant to hardware corrosion. DO NOT pump large objects or debris with this pump.This pump is for pumping water only. For de-watering purposes, always place the strainer base on a platform.

2.Volute/Impeller – Impellers are constructed of high-chrome ductile iron to minimizes wear and prolong service life.

3.Electric Motor – All 2005 series submersible pumps utilizes a 60 Hz, single-phase, 115 VAC, 0.5 HP electric motor. Consult with a licensed electrician before connecting motor to a power source. Observe all city and local safety codes.

4.Discharge Port – Connect a 2-inch hose to this port. Remember to adequately support the discharge hose to avoid stress on the pump.

5.AC Power Cable – This unit is supplied with a 25 ft. (7.6 meters) AC power cable. Always check the cable for signs of wear. NEVER! use a defective power cable.Replace the cable immediately if the cable is worn or defective.

6.Carrying Handle – Always carry the submersible pump by its handle. NEVER! carry the pump by its power cord. Carrying or lifting the pump by the power cord, will cause undue stress on the cord, and ultimately the cord will become dislodged from the pump.

7.Thermal Overload Protection – This pump is equipped with a thermal overload protection device that will shutdown the motor in the event of high operating temperatures.The motor will automatically restart once the temperature returns to an acceptable operating temperature.

8.Mechanical Oil Seal – This oil filled seal provides lubrication when running the pump dry. NEVER! run the pump dry. Running the pump dry will cause severe damage to the pump.

9.Mechanical Oil Seal Plug – Remove this plug to check and add hydraulic oil (Shell 32 or equivalent) to the oil cavity.This oil protects the mechanical seal.Oil cavity should be full enough to cover seal spring.

ST-2005 SERIES SUBMERSIBLE PUMPS — OPERATION & PARTS MANUAL — REV. #3 (09/21/04) — PAGE 11

Page 10 Page 12
Page 11
Image 11
Multiquip manual ST-2005 Series SUB. Pump Components, Submersible Pump Components
Page 10 Page 12

ST-2005 specifications

The Multiquip ST-2005 is a compact yet powerful generator that stands out in the market for its reliability and efficiency, making it a popular choice for construction sites, outdoor events, and emergency power needs. Engineered to deliver dependable electricity, it is equipped with advanced features and technologies that cater to both professional and personal use.

One of the standout features of the ST-2005 is its robust 4-stroke engine, which provides an impressive output of 2000 watts. This engine is designed with fuel efficiency in mind, allowing users to run their electrical tools and devices for extended periods without frequent refueling. The generator’s fuel tank has a capacity of 1.8 gallons, providing an operating time of up to 10 hours on a quarter load, a significant advantage for users requiring consistent power throughout the day.

Portability is another key characteristic of the Multiquip ST-2005. Weighing in at just around 50 pounds, this generator features a compact design that includes a sturdy frame and integrated wheels, allowing for easy transportation to various job sites or events. The foldable handle adds to its portability, making it convenient to store when not in use.

The ST-2005 incorporates state-of-the-art technologies that enhance its performance and usability. This includes an integrated inverter system that ensures clean and stable power output, making it suitable for sensitive electronic devices such as laptops and smartphones. Along with this, the generator features a low oil shutdown mechanism, which automatically turns off the engine if the oil level drops below a safe threshold, thereby protecting the engine from damage.

User-friendly control panels are another hallmark of the Multiquip ST-2005. The generator comes equipped with multiple output outlets, including 120V and 12V options, allowing users to connect a variety of devices simultaneously. Additionally, an easy-to-read watt meter provides real-time information on power usage, ensuring that users can efficiently manage their energy consumption.

In conclusion, the Multiquip ST-2005 is designed for durability, performance, and ease of use. With its powerful engine, portability, advanced inverter technology, and user-friendly features, it serves as an invaluable tool for anyone needing reliable power on the go, making it a worthy investment for both professionals and home users alike.
Top Page Image Contents