Multiquip WM-120PM operation manual WM-120P/S - PADDLE BLADE ADJUSTMENT

WM-120P/S — PADDLE BLADE ADJUSTMENT

Paddle blade adjustment is dependent on drum type, polyethylene or steel. Figure 3 illustrates the paddle blade adjustment when using a polyethylene drum. Figure 4 illustrates the paddle blade adjustment when using a steel drum. When using a polyethylene drum the paddle blade should come as close as possible to the drum end and side walls without making contact. If material builds up on the drum, use a rubber mallet to dislodge the material without adverse effect to the drum.

NOTE

EPOXY COMPATIBILITY - There are some epoxies and other chemicals used in certain applications that are not compatible with polyethylene drums.

Since Whiteman Industries cannot control the end user's application of this product, we will not assume responsibility for the resulting damages when exposed to incompatible chemicals.

Figure 3. Paddle Blade Adjustment, Polyethylene Drum

PAGE 14 —WHITEMANWM-120P/S— PARTS & OPERATION MANUAL — REV. #6 (07/20/05)