CAUTION:

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the WM120S/WM120P Mixer:

GENERAL SAFETY

Stop the engine when leaving the mixer unattended.

Block the unit when leaving or when using on a slope.

Maintain this equipment in a safe operating condition at all times.

Always stop the engine before servicing, adding fuel and oil.

NEVER Run engine without air filter. Severe engine may occur.

Always service air cleaner frequently to prevent carburetor malfunction.

Always be sure the operator is familiar with proper safety precautions and operations techniques before using mixer.

Always store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

NEVER Run engine without air cleaner. Severe engine damage may occur.

Always read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment.

Always be sure the operator is familiar with proper safety precautions and operations techniques before using pump.

Always store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

CAUTION:

DO NOT operate this equipment unless all guards and safety devices are attached and in place.

RULES FOR SAFE OPERATION

Caution must be exercised while servicing this equipment. Rotating and moving parts can cause injury if contacted.

When towing, an adequate safety chain must be fastened to the frame, refer to page 14.

Keep all inexperienced and unauthorized people away from the equipment at all times.

Unauthorized equipment modifications will void all warranties.

Check all fasteners periodically for tightness. Also check towing tongue bolt, lock nut and wheel lug nuts for wear.

Stop the engine and disconnect the spark plug before allowing anybody’s hands in the mixing drum.

Never pour or spray water over the engine or electric motor.

Always stand clear of dump handle when mixer is in operation. Any binding of material between the mixer blades and drum will cause drum and handle to quickly move in the discharge position.

Depending on type of mixer, test the ON/OFF switch for either the gasoline engine or electric motor before operating. The purpose of these switches is to shut down the engine or motor of the mixer.

Emergencies

Always know the location of the nearest fire extinguisher and first aid kit. Know the location of the nearest telephone. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

Maintenance Safety

NEVER lubricate components or attempt service on a running machine.

Always allow the machine a proper amount of time to cool before servicing.

Keep the machinery in proper running condition.

Fix damage to the machine immediately and always replace broken parts.

Dispose of hazardous waste properly.Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

DO NOT use food or plastic containers to dispose of hazardous waste. Emergencies

Always know the location of the nearest fire extinguisher and first aid kit. Know the location of the nearest telephone. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

PAGE 8 —WHITEMANWM-120P/S— PARTS & OPERATION MANUAL — REV. #6 (07/20/05)

Page 8
Image 8
Multiquip WM-120PM operation manual Rules for Safe Operation, Emergencies, Maintenance Safety

WM-120PM specifications

The Multiquip WM-120PM is a powerful and versatile water truck designed for a variety of applications, including construction, dust control, and agricultural usage. Engineered with performance and durability in mind, the WM-120PM is equipped with several advanced features and technologies that make it a standout choice in the water truck category.

One of the most notable features of the WM-120PM is its impressive 1,200-gallon capacity tank, allowing operators to cover large areas without frequent refills. The tank is constructed from high-quality materials that ensure longevity and resistance to corrosion, making it suitable for harsh environments. This capacity is paired with a robust pump system that provides reliable water distribution for various applications, including road maintenance and dust suppression.

The WM-120PM is equipped with a reliable engine and transmission system that delivers sufficient power for all terrains. Its drivetrain is designed to navigate both on and off-road conditions smoothly, ensuring that operators can transport water effectively to different job sites. Furthermore, the truck's compact design allows for excellent maneuverability, making it easy to operate in tight spaces and crowded areas.

Technology also plays a vital role in the WM-120PM's functionality. The water truck features an intuitive control panel that allows operators to manage water flow and spray patterns easily. This feature is particularly beneficial when adjusting the water distribution based on specific project needs, promoting efficiency and precision. Additionally, the truck can be fitted with optional spray nozzles and hoses for more specialized applications.

Safety is also a priority in the design of the WM-120PM. The truck includes features such as an anti-skid step for easy access and exit, and the braking system is designed to provide maximum control on inclines and declines. Visibility is enhanced with strategically placed lighting, ensuring that operators can work effectively even in low-light conditions.

In conclusion, the Multiquip WM-120PM water truck combines capacity, durability, and advanced technology to meet the diverse needs of various industries. Its rugged build, efficient pump system, customizable features, and safety enhancements make it an excellent solution for anyone requiring reliable water transportation and distribution. Whether for construction projects or agricultural applications, the WM-120PM proves to be a valuable asset in the field.