Multitec
Index
| Section | Page |
Adjusting dimensions for coupling |
|
|
alignment, pump sizes 32 to 65, versions |
|
|
E, Ex, F, Fx, V, Vx |
| 31 |
Aligning the pump / drive | 5.3.1 | 8 |
Applications | 4.4 | 6 |
Bearings | 7.4.4 | 22 |
Bearings and lubrication | 7.2.2 | 14 |
Checking the direction of rotation | 5.5.3 | 10 |
Commissioning | 6.1 | 11 |
Commissioning, | 6 | 11 |
Connecting the motor | 5.5.1 | 10 |
Connecting the piping | 5.4 | 9 |
Connection to power supply | 5.5/6.1.4 | 10/12 |
Contact guard | 6.1.3 | 12 |
Coupling | 7.2.4 | 15 |
Density of fluid pumped | 6.2.4 | 13 |
Description of the product and |
|
|
accessories | 4 | 6 |
Design details | 4.3 | 6 |
Designation | 4.2 | 6 |
Dismantling | 7.3 | 15 |
Dismantling and replacement of shaft |
|
|
seals | 7.3.4 | 18 |
Dismantling the bearings | 7.3.3 | 16 |
Dismantling the hydraulic systems | 7.3.6 | 20 |
Dismantling the mechanical seal | 7.3.5 | 18 |
Final check | 6.1.7 | 12 |
Foundation / Checks to be carried out |
|
|
prior to installation | 5.2 | 7 |
General | 1 | 4 |
General assembly drawings | 9 | |
General instructions | 7.1 | 14 |
General instructions (dismantling) | 7.3.1 | 15 |
Installation at site | 5 | 7 |
Installing the pump/unit | 5.3 | 7 |
List of components | 9.1 | 30 |
Lubricants | 6.1.1 | 11 |
Marking of instructions in the manual | 2.1 | 4 |
Max. clearance gaps | 7.5.1 | 25 |
Minimum flows | 6.2.3 | 13 |
Modification and manufacture of spare |
|
|
parts by customer | 2.7 | 5 |
2.3 | 4 | |
Operating limits | 6.2 | 12 |
Personnel qualification and training | 2.2 | 4 |
Preparations for dismantling | 7.3.2 | 15 |
Priming the pump and checks to be |
|
|
carried out | 6.1.2 | 11 |
7.5 | 25 | |
Reassembly | 7.4 | 20 |
| Section | Page |
Reassembly of hydraulic system | 7.4.2 | 21 |
Recommended spare parts stock for 2 |
|
|
years’ continuous operation | 7.3.7 | 20 |
Repairs | 7.5.2 | 25 |
Returning to service after storage | 6.4 | 13 |
Safety | 2 | 4 |
Safety awareness | 2.4 | 4 |
Safety instructions for maintenance, |
|
|
inspection and installation work | 2.6 | 5 |
Safety instructions for the operator / user | 2.5 | 5 |
Safety regulations / Special instructions | 5.1 | 7 |
Servicing / inspection | 7.2 | 14 |
Servicing / maintenance | 7 | 14 |
Setting the time relay | 5.5.2 | 10 |
Shaft seal | 7.2.3/7.4.3 | 15/21 |
Shutdown | 6.1.6 | 12 |
Shutdown / storage / preservation | 6.3 | 13 |
6.1.5 | 12 | |
Storage / Preservation | 3.2 | 5 |
Supervision of operation | 7.2.1 | 14 |
Switching frequency | 6.2.2 | 13 |
Technical specification | 4.1 | 6 |
Temperature of fluid pumped | 6.2.1 | 12 |
The pump is removed from the pipe and |
|
|
stored | 6.3.2 | 13 |
The unit / pump remains installed; periodic |
|
|
check of operation | 6.3.1 | 13 |
Tightening of shaft nuts on Multitec pumps |
| 23 |
Tightening torques - Tie bolts (part No. |
|
|
905) | 7.4.1 | 21 |
Transport / Handling | 3.1 | 5 |
Transport / Storage | 3 | 5 |
8 | 26 | |
Unauthorized modes of operation | 2.8 | 5 |
Vacuum balance line | 5.4.1 | 10 |
3
