Software

17.Click on the Voice TEI field in Network Parameters. Refer to your Voice TEI entry in the Network Configuration section in Before You Start Loading Your Software. If the Voice TEI is different, click on the drop-down list arrow, then click on the selection that matches the Voice TEI supplied by your ISDN service (i.e., Disabled, Auto TEI, or zero to 63).

18.If your ISP or Remote Access Server (RAS) uses Point-to-Point Protocol (ppp), click on the User Name field in the Authentication group and enter your user name. If SLIP protocol is used by your ISP or RAS, authentication is provided in script form.

19.If your ISP or RAS uses Point-to-Point Protocol (ppp), click on the Password field in the Authentication group and enter your password. If SLIP protocol is used by your ISP or RAS, authentication is provided in script form.

20.Depending on your default configuration, the US Parameters group or the Europe Parameters group will be active.

If the US Parameters are active, enter the Data SPID supplied by your local phone company and you re- corded in Before You Start Loading Your Software.

If the Europe Parameters are active, enter the Data ISDN number supplied by your local telephone com- pany and you recorded in Before You Start Loading Your Software.

21.If US Parameters are active, enter the Voice SPID.

If Europe Parameters are active, enter the Voice

ISDN.

15

Page 21
Image 21
Multitech MTPSR1-202ST quick start Isdn