Specifications, All Models | Murphy LS200N, L1100 specs

Specifications

•Body: Nickel plated steel; optional 316 stainless steel (meets NACE standard MR-01-75 for direct exposure to H2S service)

•Float: 304 stainless steel to operate in 0.5 specific gravity or heavier fluids (LS200 Series models only)

•Pressure rating: 2000 psig (13.8 MPa) [138 bar] (LS200 models only)

•O-ring: Viton

•Process connection: 2” NPT

•Temperature rating: -20 to 300°F (-29 to 149°C)

•Electrical: SPDT std. (see “Electrical” section for configuration/rating.

•Wiring: 18 AWG x 36 in. (1.0 mm2 x 916 mm)

•Process connection: 2” NPT

•DVO valve: 3 way N.C. w/manual operator, all connections 1/8” NPT (minimum 30 psig required)

•Filter/pressure regulator set:

•Regulator: 0 to 75 psig (0 to 517 kPa) [0 to 5.17 bar] range

•Maximum input pressure: 300 psig (2.07 MPa) [20.7 bar]

•Process connection: 2” NPT

•DVO valve: 3 way N.C. w/manual operator; all connections 1/8” NPT

•Process connection: 2” NPT

•Vent valve: 2 way N.C. snap action w/ 1/16in. (2mm) orifice and Viton seat; Inlet: 1/8” NPT; outlet 3/8” NPT

•Process connection: 1-1/2” NPT

•Pressure rating: 1500 psig (10.3 MPa) [103.2 bar]

•Float: BUOYGLAS™ operates to 0.5 specific gravity; Optional stainless steel to operate in 0.65 specific gravity

•Electrical: SPDT switch

Approximate Shipping Weights and Dimensions

All models: 6 lb. 10 oz. (3 kg);

14 x 5 x 3-1/2 in. (356 x 127 x 89 mm)

Section 15	00-02-0563
01-11-06	- 14 -