FEATURES AND CONTROLS

A

I

B

E

C

J

H

1

2

D

G

F

Snow Thrower Controls

B.Auger Drive Clutch Lever — Used to engage and disengage the auger and impeller. To engage push down, to disengage release.

C.Traction Drive Clutch Lever — Used to propel snow thrower for- ward or reverse. Push down to engage, release to disengage.

D.Snow Chute Deflector — Used to change the direction the snow is thrown.

E.Crank — Used to change direction of the snow discharge. Turn han- dle clockwise to turn chute to right. Turn handle counterclockwise to turn chute to left.

F.Skid Shoe — Used to adjust ground clearance of auger housing.

Figure 3

G.Clean-Out Tool — Used to remove snow and debris from the dis- charge chute and the auger housing.

H.Free-HandTMControl — After engaging the traction control (left hand) and auger control (right hand), allows the operator to release the auger control lever to use the other controls.

I.Remote Chute Control — Push forward to discharge snow high and far. Pull back to discharge snow down.

J.Easy-TurnTMTraction Control — When engaged, allows the oper- ator to release the left traction wheel, but allows the right wheel to continue driving for easy turning.

11

Page 11
Image 11
Murray 1737921, 1695720 manual Features and Controls