MAINTENANCE
CHANGE THE SPARK PLUG
Remove the Snow Hood
1.Remove the choke control knob (A, Figure 21).
2.Remove the safety key (B).
3.Remove the mounting screws (A, Figure 22).
4.Slowly remove the snow hood (B) Make sure that the primer button hose (C) and the ignition wire (D) are not disconnected.
5.The spark plug (E) can now be accessed.
6.To install the snow hood, first make sure that the primer button hose and the ignition wire are connected.
7.Mount the snow hood to the engine and secure with the mounting screws.
8.Connect the choke control knob (A, Figure 23) with the choke shaft on the carburetor (B). Make sure the choke control knob is properly installed. If the choke control knob is not installed correctly, the choke will not operate.
9.Install the safety key (C).
A |
|
B |
|
Snow Thrower Engine | Figure 21 |
B | A |
|
|
| |
D |
|
|
E |
|
|
|
| C |
Removing the Snow Hood |
| Figure 22 |
A | B | C |
|
|
Connecting Choke Control Knob | Figure 23 |
22
