ENGLISH
Safe Operation Practices for Snow Throwers
As Recommended By: American National Standards Institute.
IMPORTANT: Safety standards require operator presence controls to minimize the risk of injury. Your snow thrower is equipped with such con- trols. Do not attempt to defeat the function of the operator presence control under any circum- stances.
Training
1.Read the operating and service instruction manual carefully. Be thoroughly familiar with the controls and the proper use of the equip- ment. Know how to stop the unit and disen- gage the controls quickly.
2.Never allow children to operate the equip- ment. Never allow adults to operate the equipment without proper instruction.
3.Keep the area of operation clear of all per- sons, particularly small children and pets.
4.Exercise caution to avoid slipping or falling especially when operating in reverse.
Preparation
1.Thoroughly inspect the area where the equip- ment is to be used and remove all doormats, sleds, boards, wires, and other foreign ob- jects.
2.Disengage all clutches before starting the en- gine (motor).
3.Do not operate the equipment without wear- ing adequate winter outer garments. Wear footwear that will improve footing on slippery surfaces.
4.Handle fuel with care; it is highly flammable.
a.Use an approved fuel container.
b.Never remove fuel tank cap or add fuel to a running engine (motor) or hot engine (motor).
c.Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.
d.Replace fuel cap securely and wipe up spilled fuel.
e.Never store fuel or snow thrower with fuel in the tank inside of a building where fumes may reach an open flame or spark.
f.Check fuel supply before each use, allow- ing space for expansion as the heat of the engine (motor) and/or sun can cause fuel to expand.
5.For all units with electric starting motors use electric starting extension cords certified CSA/UL. Use only with a receptacle that has been installed in accordance with local in- spection authorities.
6.Adjust the snow thrower height to clear gravel or crushed rock surface.
7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manufac- turer).
8.Let engine (motor) and snow thrower adjust to outdoor temperatures before starting to clear snow.
9.Always wear safety glasses or eye shields during operation or while performing an ad- justment or repair to protect eyes from foreign objects that may be thrown from the snow thrower.
Operation
1.Do not operate this machine if you are taking drugs or other medication which can cause drowsiness or affect your ability to operate this machine.
2.Do not use this machine if you are mentally or physically unable to operate this machine safely.
3.Do not put hands or feet near or under rotat- ing parts. Keep clear of the discharge open- ing at all times.
4.Exercise extreme caution when operating on or crossing gravel drives, walks or roads. Stay alert for hidden hazards or traffic.
5.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect snow thrower for any damage, and repair the damage before re- starting and operating the snow thrower.
6.If the unit should start to vibrate abnormally, stop the engine (motor) and check immedi- ately for the cause. Vibration is generally a warning of trouble.
7.Stop the engine (motor) whenever you leave the operating position, before unclogging the auger/impeller housing or discharge chute and when making any repairs, adjustments, or inspections.
8.When cleaning, repairing, or inspecting, make certain the auger/impeller and all moving parts have stopped and all controls are dis- engaged. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent accidental starting.
9.Take all possible precautions when leaving the snow thrower unattended. Disengage the auger/ impeller, stop engine (motor), and re- move key.
10.Do not run the engine (motor) indoors, except when starting the engine (motor) and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous (containing CARBON MONOXIDE, an ODORLESS and DEADLY GAS).
11.Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes.
12.Never operate the snow thrower without proper guards, plates or other safety protec- tive devices in place.
13.Never operate the snow thrower near enclos- ures, automobiles, window wells, drop- offs, and the like without proper adjustment of the snow discharge angle. Keep children and pets away.
14.Do not overload the machine capacity by at- tempting to clear snow at too fast a rate.
15.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing up.
16.Never direct discharge at bystanders or allow anyone in front of the unit.
17.Disengage power to the collector/impeller when snow thrower is transported or not in use.
18.Use only attachments and accessories ap- proved by the manufacturer of the snow thrower (such as tire chains, electric start kits, ect.).
19.Never operate the snow thrower without good visibility or light. Always be sure of your foot- ing and keep a firm hold on the handles.
Walk;never run.
20.Do not over- reach. Keep proper footing and balance at all times.
21.Exercise caution if operating on steep slop- ing surfaces.
22.This snow thrower is for use on sidewalks, driveways and other ground level surfaces.
23.Do not use the snow thrower on surfaces above ground level such as roofs of resi- dences, garages, porches or other such structures or buildings.
Maintenance And Storage
1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.
2.Never store the snow thrower with fuel in the tank inside a building where ignition sources are present such as hot water and space heaters, clothes dryers, and the like. Allow the engine (motor) to cool before storing in any enclosure.
3.Always refer to operator’s guide instructions for important details if the snow thrower is to be stored for an extended period.
4.Maintain or replace safety and instruction la- bels, as necessary.
5.Run the snow thrower a few minutes after throwing snow to prevent freeze- up of the auger/impeller.
| 11 |
