GENERAL ADVICE

INSTALLATION PRECAUTIONS and USER INFORMATION

Your new kW 500 Integrated amplifier is designed and built to provide trouble-free perform- ance, but as with all electronic devices it is necessary to observe a few precautions:

Heed all warnings shown on the back of the product.

Only connect the kW 500 Integrated amplifier to a mains outlet having the same voltage as marked at the back of the unit.

Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.

Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items placed on them.

Do not use near water, or place water-filled containers on the amplifier, for example, flower vases or potted plants. If water does spill inside, immediately pull out the mains plug from the wall socket and inform your dealer, who should then check the unit before further use. Entry of liquid into the amplifier is dangerous, and may cause electric shock or fire hazard.

Do not place the unit near heat sources such as radiators, direct sunlight or other equipment. The case of this amplifier can run at high temperatures - operate the unit in a well ventilated area, and do not touch the cabinet sides or top after periods of use at high output power.

Do not remove covers or try to gain access to the inside. There are no internal user adjust- ments or fuses you can replace yourself. Refer all service work to an authorised Musical Fidelity agent.

NOTE: Unauthorised opening of the equipment will invalidate any warranty claims.

Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may harm the surface finish.

The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by lightning. For protection of your audio system during electrical storms, remove the mains plugs and disconnect any aerial lead.

If after-sales service is required, to help your dealer identify the kW 500 Integrated amplifier please quote the serial number located on the rear panel of the unit.

RADIO FREQUENCY INTERFERENCE (R.F.I)

This product has been tested to ensure that its operation is not adversely affected by normal background levels of R.F.I., and that it does not itself generate excessive amounts of interfer- ence. However, if a problem persists, please contact your Musical Fidelity agent.

Issue 2: Sept 2004

kW 500 Integrated Amplifier

Instructions for use Page 3 of 10

 

 

 

Page 2 Page 4
Page 3
Image 3
Musical Fidelity KW 500 General Advice, Installation Precautions and User Information, Radio Frequency Interference R.F.I
Page 2 Page 4

KW 500 specifications

The Musical Fidelity KW 500 is a high-performance integrated amplifier that is widely recognized for its exceptional sound quality and advanced technology. This amplifier is a perfect blend of power, precision, and musicality, making it a favorite among audiophiles and music enthusiasts.

One of the most notable features of the KW 500 is its power output. With a robust 500 watts per channel into 8 ohms, it can drive even the most demanding speakers with ease. This power is not just about volume; it translates into a dynamic range that allows for the subtle nuances of music to shine through, delivering an immersive listening experience. The KW 500 is designed to deliver an authoritative bass response, crystal-clear mids, and a smooth treble, creating a balanced sound signature across various genres.

The KW 500 incorporates advanced Class A/B amplification technology, providing the best of both worlds—efficiency and sound quality. This type of amplification ensures that the amplifier operates at optimal temperatures while delivering a warm, rich sound. The design features high-quality components, including large capacitors and a robust power supply, which contribute to its overall performance and reliability.

Another key feature of the KW 500 is its impressive array of input options. It comes equipped with multiple analog inputs, including balanced XLR and unbalanced RCA connections, as well as a dedicated phono stage for vinyl enthusiasts. This versatility allows users to connect various audio sources, from digital devices to turntables, facilitating a seamless listening experience.

The KW 500 also includes built-in active crossover technology, enabling it to perform exceptionally well within multi-amplification systems. This feature allows for precise control over the frequency distribution, ensuring that each driver in a speaker system operates optimally. This technology is particularly beneficial for audiophiles who seek to tailor their sound systems to achieve the best possible audio fidelity.

Moreover, the KW 500 is constructed with a heavy-duty chassis that minimizes vibrations and interference, further enhancing audio performance. Its minimalist design not only looks elegant but also serves functional purposes, ensuring that the components remain isolated for the best sound reproduction.

In summary, the Musical Fidelity KW 500 stands out with its powerhouse performance, advanced technologies, and versatility. Its combination of high output power, premium components, and thoughtful design makes it a top choice for those seeking a superior audio experience in an integrated amplifier. Whether you're listening to your favorite vinyl records or streaming high-resolution audio, the KW 500 is built to elevate your musical enjoyment to new heights.
Top Page Image Contents