7)Now check the new manual/automatic cap as follows (Fig. 18):
1.Is the single point status indicator showing green?
2.Is the expiry day OK?
If YES is the answer to both questions, then proceed as follows. If the answer is NO to either question, get a new cap.
FIGURE 18 |
Water |
Inlet |
Valve |
Single |
Point |
Indicator |
Expiry |
8)Hold the CO2 cylinder through the fabric of the Inflatable Vest with LIFTTM (Fig. 19). Position the replacement cap with the water inlet valve pointing to the right and press firmly onto the inflator body and sealing ring (Fig. 20).
FIGURE 19 | FIGURE 20 |
Inflatable Vest with LIFTTM Owner’s Manual | 14 |
