7)Fold the bottom portion of the lobe over (Fig. 30).
a.Position the lobe so it does not cover the inflator (Point A).
b.Put the inflator beaded handle through the opening in the cover (Point B) and attach to the Velcro tab.
c.Position the chest buckle under the cover (Point C).
FIGURE 30 |
C |
B |
A |
8)Fold the lobe over on the Fold #3 dashed line (Fig. 31).
a. Position the folded lobe so it does not cover the inflator (Point A).
FIGURE 31
A |
9) Fold the cover panel down so that it covers the lobe (Fig. 32).
Inflatable Vest with LIFTTM Owner’s Manual | 20 |
