Mustang Survival manual Deflating the LP, Repacking Your MD3090 and MD3095

7)Refold the Inflatable PFD in accordance with the Repacking section (p. 12).

YOUR MD3095 IS NOW READY FOR USE

Deflating the LP

To deflate the life preserver, reverse the oral-inflation tube dust cap and insert it into the valve or depress valve with fingertip (Fig. 5).

The dust cap will not lock in the deflate position so it is necessary to hold it in place (Fig. 5). Gently squeeze the cell until all air or gas has been expelled. Put the inflation tube dust cap back in its normal position on the oral inflation tube (Fig. 5).

FIGURE 10

Cap In

Deflate

Position

Repacking Your MD3090 and MD3095

Before repacking, completely deflate the inflation cell. Force excess air out through the inflation tube (Fig. 7). Do not wring cell. Put the inflation tube cap back in the stowed position (Fig. 5).

NOTE: Before following the repacking sequence, be sure to properly re-arm your MD3090 or MD3095 LP.

1)Fold lapels (A) across the front along the dotted line shown in Fig. 11.

2)Fold side (B) inward along dotted lines. Secure with Velcro™ (Fig.12).

3)Fold outer lapel (C) and secure Velcro™ (Fig. 13). Your MD3090 or MD3095 will look as illustrated in Fig. 14.

7 Compact Tactical Life Preserver Owner’s Manual