DISPLAYS AND OPERATING CONTROLS
LED’s
Fault (red LED)
Status | Meaning |
|
| The 604/608MFX has detected an error. The signaling |
|
ON | contact |
|
| opens at the same time. |
|
OFF | No errors detected by the 604/608MFX. |
|
Stby - Standby (green LED, 608MFX Only) | ||
|
| |
Status | Meaning |
|
ON | The 608MFX standby function is activated, indicating the |
|
| 608MFX is in the standby passive mode. |
|
OFF | The standby function is deactivated. |
|
Flashing | The 608MFX standby function is activated, indicating the |
|
| 608MFX is in the active mode. In other words, the Ring |
|
| master has failed and the standby takes over the data |
|
| traffic. |
|
RM - Redundancy Manager (green LED) | ||
|
| |
Status | Meaning |
|
| The 604/608MFX is operating in the redundancy |
|
| manager mode. The ring is operating free of errors, as |
|
ON | monitored by the redundancy manager. |
|
| Note: One (and only one) 600 Series Switch must |
|
| operate as the redundancy manager in each ring. |
|
|
|
|
OFF | The 608MFX is not operating in the redundancy manager |
|
| mode. |
|
| The redundancy manager has detected a break in the |
|
Flashing | ring. |
|
| The 608MFX makes the connection between its two ring |
|
| ports so that a functional bus configuration is re- |
|
| established |
|
| within 300 ms. |
|
12/15/05 | 12 | |
