N-Tron 608MFXE-ST-15, 608MFX-ST, 604MFX-ST, 608MFXE-ST-40, 608MFXE-ST-80 manual Port LED’s, 12/15/05

Port LED’s

The display Mode is indicated by the LED pair labeled “Display Mode”, and the state is given by the legend on the front of the 600 Series Switch. To transition between these Display Modes, the Select/Set button must be pressed briefly (similar to left mouse click). The four states are: Port Status, 100Mbit/s, Full Duplex, Fault Mask.

Display Mode:	Meaning
State = Port Status
OFF	No Valid Connection to the port.
Green	Valid Connection to the port (good link).
	Flashes green once per cycle, port switched
	to standby
	Flashes green three time per cycle, port is
	disabled by configuration
Yellow	Indicates Port is actively receiving data

Display Mode:	Meaning
State = 100 Mbps
OFF	Port operating at 10 Mbps
Green	Port operating at 100 Mbps

Display Mode:	Meaning
State = Full Duplex
OFF	Port operating half duplex
GREEN	Port operating full duplex

Display Mode:	Meaning
State = Fault Mask
OFF	Port is not currently monitored
Green	Port is currently monitored

12/15/05 13