REFERENCE
SPECIFICATIONS
Amplifier Section
Power output Stereo Mode | 25W (6 ohms within rated distortion, 1kHz) |
IHF dynamic power (6 ohms) | 28W |
Total harmonic distortion at rated power | 0.15% |
Damping factor (6 ohms) | >102 |
Input sensitivity and impedance (Tape IN) | 370mV/27kΩ |
Frequency response | +1 |
Signal/noise ratio, | 95dB (Ref. rated power/ 6 ohms |
Signal/noise ratio | 80dB (Ref. 1W / 6 ohms |
TUNER SECTION
AM SECTION |
|
Tuning range | 520kHz - 1710kHz (North America version, 10kHz steps) |
| 522kHz |
Usable sensitivity | 60dBuV |
S/N ratio | 40dB |
Total Harmonic Distortion | 1.5% |
Selectivity | 25dB |
Frequency response | |
FM SECTION |
|
Tuning range | 87.50MHz – 108MHz (50kHz steps) |
Usable sensitivity, MONO | 10dBuV |
S/N Ratio MONO | 60dB |
S/N Ratio STEREO | 55dB |
Total Harmonic Distortion, MONO | 0.3% |
Total Harmonic Distortion, STEREO | 0.5% |
Frequency response | |
Channel Separation | 35dB |
RDS decode sensitivity | 29dBuV |
|
|
CD SECTION |
|
output level | 1.16V |
Frequency response (ref. 0dB 1kHz, | +1dB |
Total harmonic distortion (ref. 1kHz, VIDEO OUT) | 0.04% |
Signal/Noise ratio | 100dB |
Channel balance (ref. 0dB 1kHz) | 0.5dB |
Dynamic range | 82dB |
Channel separation | 78dB (1kHz) |
| 78dB (10kHz) |
|
|
PHYSICAL SPECIFICATIONS |
|
Dimensions (W x H x D) | 213 x 103 x 324 mm (Net) |
| 213 x 116 x 362 mm (Gross) |
Net weight | 4.5kg |
Shipping weight | 6.0kg |
Note: Gross dimensions include feet, extended buttons and rear panel terminals.
Specifications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest information about C 715.
ENGLISH
FRANÇAIS
ESPAÑOL
ITALIANO
SVENSKA NEDERLANDS DEUTSCH
РУССКИЙ
23
