IDENTIFICATION OF CONTROLS

FRONT PANEL

 

16

 

 

 

17

 

 

 

 

 

 

 

18

 

2

1

3

4

5

6

7

8

9

10

11

12

13

14

15

ENGLISH

FRANÇAIS

ESPAÑOL

1POWER: Press this button to switch ON the C 715. The Standby LED indicator will turn from amber to blue and illuminate the Vacuum Fluorescent Display (VFD). Pressing the power button again turns the unit back to standby mode.

If the disc tray is open and the C 715 is powered OFF, the disc tray will draw close and the unit powered OFF.

2INDICATOR: This indicator will light up amber when the C 715 is in standby state. When the C 715 is at ON state, this indicator will illuminate blue.

3DISC TRAY: With the DISC TRAY open, insert a compatible media disc face down onto the tray.

No Disc” appears on the C 715’s VFD if the disc is placed upside down.

4SOURCE: Toggle this button to select through the following sources:

FM / AMCD USB

MPAUXVIDEO TAPE

5RECORD: Use this button to start recording to a USB device.

6BAND / (PLAY) [ ]: In CD or USB mode, press this button to start playback. If the disc tray is open, press this button to automatically close the tray and start playback if a disc is loaded.

In AM/FM mode, toggle this button to select AM or FM mode.

7FM MODE/ (PAUSE) [ ] : In FM mode, this button will toggle between FM Stereo and FM Mono. The front panel [FM MODE] key is a dual- purpose control. In the normal position, (“STEREO” and “TUNED” icons are illuminated in the VFD) only the stations with a strong signal can be listened to and the noise between stations is muted.

Pressing the [FM MODE] button again (“STEREO” icon is extinguished; only “TUNED” is illuminated) allows distant and potentially noisy stations to be received. Noise is reduced if the FM station signal level is less than the FM stereo threshold (since mono FM is inherently less noise-prone) though at the sacrifice of stereo effect.

In CD or USB mode, press this button to toggle between Pause and Play of a compatible media disc.

8RDS MODE/ (STOP) [ ]: When tuned to a RDS station, toggle this button to cycle through the following RDS modes:

PROGRAM SERVICE

RDS CLOCK TIME

RDS PROGRAM TYPE

RDS RADIO TEXT

TRAFFIC ANNOUNCE

Refer to the section “RDS MODE OPTIONS” for a description of the above modes.

In CD or USB mode, press this button to stop playback and re-set the pickup to the beginning of the disc. The display reverts to showing the total number of tracks and total playing time of an audio disc or total number of WMA/MP3/Audio files. If the C 715 was programmed to play a selection of tracks, the program will be retained in the memory.

ITALIANO

SVENSKA NEDERLANDS DEUTSCH

РУССКИЙ

Page 7
Image 7
NAD C715 Identification of Controls, Front Panel, English Français Español, Italiano Svenska Nederlands Deutsch Русский