NAD C715 owner manual Review Program List, Edit Program List, Delete Program

OPERATION

USING THE C 715 – CD mode

ENGLISH

FRANÇAIS

ESPAÑOL

ITALIANO

REVIEW PROGRAM LIST

1Initiate review of your programmed entries by pressing [PROGRAM] at STOP mode.

2The VFD will show the first Program Number.

3Press [PROGRAM] repeatedly to step through the program sequence. You will have reached the end of the program sequence when “P-End” is displayed at the VFD.

EDIT PROGRAM LIST

1Initiate editing of your programmed entries by pressing [PROGRAM] at STOP mode.

2The VFD will show the first Program Number.

3Press [PROGRAM] repeatedly to step through the program sequence. Stop at the program sequence you want to edit.

4To change the programmed track/file of a particular sequence, use the Direct-Entry numeric keypad buttons to overwrite the current track/file.

DELETE PROGRAM

1To delete a particular programmed track/file, press repeatedly [PROGRAM] key in STOP mode until the desired programmed sequence is reached. Press SR 7’s [CLEAR] key once and the track/file in the particular sequence is deleted. The program sequence will adjust accordingly as a programmed track/file is deleted.

2To clear the program memory, perform any of the following steps

•Press [OPEN] to open the disc tray.

•Press [PROGRAM] at stop mode and then press and hold SR 7’s [CLEAR] key until the unit reverts to the default display, i.e. total track number and playback time.

DEUTSCH NEDERLANDS SVENSKA

РУССКИЙ

5Press [PROGRAM] again to continue with other program track changes or press [STOP] to end the editing.

12