Nady Systems CMX-16A owner manual S P E C I F I C At I O N S

S P E C I F I C AT I O N S

1. INPUT SECTION

Input	Connector	Input Impedance	Nominal Level	Max Level
MONO CH MIC	XLR	>1.3K Ω	+2 dBm	+14 dBm
MONO CH LINE	1/4" TRS	>10K Ω	+4 dBm	+22 dBm
STEREO CH LINE	1/4" TRS	>10K Ω	+4 dBm	+22 dBm
TAPE IN	RCA PIN JACKS	>10K Ω	+2 dBm	+22 dBm
AUX RETURNS	1/4" TS	>10K Ω	+4 dBm	+22 dBm
INSERT IN	1/4" TRS	>10K Ω	+4 dBm	+22 dBm

2. OUTPUT SECTION

Output	Connector	Output Impedance		Nominal Level	Max Level
STEREO OUT L/R	XLR & 1/4" TS	120	Ω	+4~+6 dBm	+22 dBm
AUX SENDS 1,2	1/4" TS	120	Ω	+4~+6 dBm	+20 dBm
G1-G2 OUT	1/4"TRS	120	Ω	+4~+6 dBm	+22 dBm
INSERT OUT	1/4" TRS	120	Ω	+4~+6 dBm	+22 dBm
CNTRL R. OUT	1/4" TS	1K	Ω	+4~+6 dBm	+22 dBm
REC OUT	RCA PIN JACKS	1K	Ω	+4~+6 dBm	+22 dBm
PHONES	1/4" TRS	200	Ω	–––	40mW X 2

3. FREQUENCY RESPONSE

ANY INPUT TO

ANY OUTPUT ....................20 Hz to 20 KHz =/- 3dB @ 0 dBm

4. TOTAL HARMONIC DISTORTION

ANY INPUT TO

ANY OUTPUT ..............0.02%, 20 Hz-20 KHz @ 1Khz, 0 dBm

5. INPUT CHANNEL EQUALIZATION

High shelving	....................12 kHz, +/- 15 dB, Q fixed at 2 oct.
Mid bell	2.5 khZ, +/- 15 dB, Q fixed at 1 oct.
Low shelving	80 Hz, +/- 15 dB, Q fixed at 2 oct.

6. GAIN CONTROL RANGE

Input channel trim control....	Stop to stop- Mic +10 dB~+60 dB,
Line	+10 dB~+40 dB
Channel/Master Faders	-∞	to +15 dB
Aux Send/Aux Master Send	................................Off to +15 dB
Aux Return	Off to Unity to +20 dB
Tape In Level Control	Off to +15 dB

8. HUM AND NOISE

20 Hz-20 Khz, Rs=150 ohms, input TRIM @ 0 dB, input sensi-

tivity at –60 dB
EQUIVALENT INPUT NOISE	-129 dBm
RESIDUAL OUTPUT NOISE	-85 dBm

9. VU METERS

10-segment LED X 2, L/G1, R/G2

10. PHANTOM POWER

+48 VDC, globally selected

11. POWER REQUIREMENTS

External PSU, 120 VAC/60Hz or 230 VAC/50Hz

12. POWER CONSUMPTION

40 Watts, External PSU

13. DIMENSIONS AND WEIGHT

15" x 17.5" x 3.75" (381 x 495 x 95 mm), 14.85 lbs (6.75 Kg), External PSU not included

7. CROSSTALK @ 1KHZ

ADJACENT CHANNEL INPUTS	......................-78 dB~-68 dB
INPUT TO OUTPUT	-78 dB~-68 dB

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.

13