Connecting Audio Output

When the RF Signal LED (10) on the receiver lights up, the system frequency is properly synchronized. To change to a different frequency, reset the Frequency Select DIP Switches (4) and sync the transmitter again to the new selected frequency first, after turning the transmitter off and then on again. If no action is taken during the 10 seconds of active data transfer ( i.e., the transmitter is not turned on or properly positioned) the receiver and the transmitter units do not link and transmitter’s previously programmed channel remains unchanged.

Note: Only one transmitter can be used with one receiver. It is not possible to use two transmitters on the same frequency and mix the output of these transmitters into one wireless receiver.

Note: The IR link is infrared light and works best when this data transfer is accomplished in a light-shielded or darker environment. It may not be successful in a brightly lit area. If the transfer fails, repeat the procedure in a darker location or somehow shield the link from outside light to successfully program the transmitter with the selected channel info from the receiver.

The MGT-16 receiver’s Audio Output Jack

(7)is a ¼”unbalanced line out and its level is controlled by the Volume Knob (3). Plug an audio cable with a ¼” mono (tip/sleeve) plug into the audio output jack and plug the other end into your pedal board or amplifier as you would with a direct cord from the instrument. When the Volume knob is set to maximum receiver volume setting, the system audio output is approximately +4dB higher than a direct instrument-to- cord-to-amp connection.

Note: As when making any connection, make sure the amplifier volume control is set at the minimum level before plugging in the receiver to avoid possible speaker damage.

Your MGT-16 receiver is now operational and ready to use. Once you have completed the above steps, proceed to the following instructions for the MT-16A/R Instrument transmitter.

MT-16A/R Instrument Transmitter

Powering the Transmitter

The MT-16A/R Instrument transmitter requires one AAA size battery (25). To install the battery, push the locking tabs on the Battery Cover (25) and push out to expose the Battery Compartment (22). Insert one fresh AAA battery according to the correct polarity as indicated on the transmitter body. Close the battery cover, ensuring the cover is snapped shut. A fresh AAA alkaline battery generally provides up to 6-8 hours of operation, but in order to ensure optimal performance it is recommended that the battery be replaced after six hours of use or as indicated by the Low Battery Indicator (20).

To turn on the transmitter, slide the Power Switch (17) in the direction of the arrow. The Low Battery Indicator will flash once. The unit is now on and the receiver’s RF Signal LED (10) will light up if the transmitter has been frequency synchronized to the receiver’s selected frequency as per below.

As the batteries weaken, the Low Battery Indicator will flash to warn that the battery level is too low and should be replaced as soon as possible. To preserve battery life, turn the transmitter Off when not in use.

To turn the transmitter Off, slide the Power Switch in the opposite direction of the arrow.

The transmitter has a 15dB Pad (18) On/Off switch which can be selected to attenuate high output instrument pick-up levels if needed to reduce distortion through the system. To turn On, slide the switch in the direction of the arrow. Turning opposite the arrow indication is for standard 1:1 gain operation and is recommended for normal, optimal low-noise operation.

The transmitter has an Internal Audio Level Adjust (23) to set the audio deviation level. It is accessed by inserting a small screwdriver into the slot. Turning this

MGT16R, MGT16A, MGT16 specifications

Nady Systems is a prominent name in the field of wireless microphone technology, and their MGT series—including the MGT16, MGT16A, and MGT16R models—has been designed to meet the needs of both professional performers and casual users. Each of these models showcases Nady's commitment to quality and innovation in audio transmission.

The MGT16 is a versatile wireless microphone system that operates in the 16-channel UHF frequency range, ensuring a clear and reliable audio signal. This model is known for its high-quality audio performance, making it suitable for a variety of applications, from live performances to public speaking engagements. With its compact design and durable construction, the MGT16 is perfect for artists on the go.

Upgraded to the MGT16A, this model offers improved features such as auto-scan capabilities for finding the best available frequencies, ensuring minimal interference during operation. This is particularly beneficial in crowded environments where multiple wireless systems may be in use. The MGT16A retains the same user-friendly interface as its predecessor, allowing for quick setup and easy adjustments on the fly. Additionally, it boasts a longer battery life, providing peace of mind during extended performances.

The MGT16R enhances the line further with additional refinements in audio processing, delivering a richer sound profile. Its advanced diversity reception technology minimizes dropouts and enhances signal stability, which is crucial for professional applications. This model also features a robust metal receiver housing, designed to withstand the rigors of live performances and touring. The MGT16R also includes a high-quality dynamic microphone, which captures vocals with clarity and precision, ensuring that performers' voices are heard loud and clear.

Across the MGT series, common features include a lightweight design, which facilitates ease of use and portability, as well as an easy-to-read LCD display that provides users with real-time feedback on battery status and signal strength. Furthermore, Nady systems are engineered for fast and straightforward setup, allowing users to focus on their performance instead of technical difficulties.

In summary, the Nady Systems MGT16, MGT16A, and MGT16R wireless microphone systems embody the brand's pursuit of excellence in audio technology. With a range of features designed to enhance sound quality, signal reliability, and user convenience, these models are ideal for anyone seeking professional-grade audio solutions. Whether for stage performances, events, or personal use, Nady's MGT series stands out as a reliable choice in wireless microphone systems.

Nady Systems MGT16R, MGT16A owner manual Connecting Audio Output, Powering the Transmitter

Models: MGT16R MGT16A MGT16