Nady Systems MXE-1212 owner manual S P E C I F I C At I O N S

S P E C I F I C AT I O N S

1. INPUT SECTION

Input	Connector	Input Impedance	Nominal Level	Max Level
MONO CH MIC	XLR	>1.3K Ω	+2 dBm	+14 dBm
MONO CH LINE	1/4" TRS	>10K Ω	+4 dBm	+22 dBm
STEREO CH LINE	1/4" TS	>10K Ω	+4 dBm	+22 dBm
TAPE IN	RCA PIN JACKS	>10K Ω	+2 dBm	+22 dBm
AUX RETURNS	1/4" TS	>10K Ω	+4 dBm	+22 dBm
INSERT IN	1/4" TRS	>10K Ω	+4 dBm	+22 dBm

2. OUTPUT SECTION

Output	Connector	Output Impedance		Nominal Level	Max Level
STEREO OUT L/R	XLR & 1/4" TRS	120	Ω	+4~+6 dBm	+22 dBm
AUX SENDS	1/4" TS	120	Ω	+4~+6 dBm	+20 dBm
INSERT OUT	1/4" TRS	120	Ω	+4~+6 dBm	+22 dBm
REC OUT	RCA PIN JACKS	1K	Ω	+4~+6 dBm	+22 dBm
PHONES	1/4" TRS	200	Ω	–––	40mW X 2

3. FREQUENCY RESPONSE

ANY INPUT TO

ANY OUTPUT ....................20 Hz to 20 KHz =/- 3dB @ 0 dBm

4. TOTAL HARMONIC DISTORTION

ANY INPUT TO

ANY OUTPUT ..............0.02%, 20 Hz-20 KHz @ 1Khz, 0 dBm

5. INPUT CHANNEL EQUALIZATION

High shelving	....................12 KHz, +/- 15 dB, Q fixed at 2 oct.
Mid bell	2.5 KhZ, +/- 15 dB, Q fixed at 1 oct.
Low shelving	......................80 Hz, +/- 15 dB, Q fixed at 2 oct.

6. MASTER MIX EQUALIZATION

7 band (63Hz,150Hz,400Hz,1KHz,2.5KHz,6.4KHz,15KHz),

+/-12dB

7. GAIN CONTROL RANGE

Input channel trim control....Stop to stop- Mic +10 dB~+60 dB,

	Line +10 dB~+40 dB
Channel/Master/Effect Faders	-∞	to +15 dB
Aux Send/Aux Master Send	Off to +15 dB
Aux Return	Off to +20 dB
Channel and Master Effect Sends	Off to +15 dB

9. HUM AND NOISE

20 Hz-20 KHz, Rs=150 ohms, input TRIM @ 0 dB, input sen- sitivity at –60 dB

EQUIVALENT INPUT NOISE	-129 dBm
RESIDUAL OUTPUT NOISE	< 90 dBm

10. VU METERS

10-segment LED X 2

11. PHANTOM POWER

+48 VDC, globally selected

12. POWER REQUIREMENTS

Voltage selectable, 120VAC/60Hz or 230VAC/50Hz

13.	FUSE
115VAC Operation		2A, 5x20mm, 250V
230VAC Operation		1A, 5x20mm, 250V
14.	POWER CONSUMPTION
12W

15. DIMENSIONS AND WEIGHT

16” x 17” x 3.5” (406 x 432 x 89 mm), 14.7 lbs (6.7 Kg)

8. CROSSTALK @ 1KHZ

ADJACENT CHANNEL INPUTS	......................-78 dB~-68 dB
INPUT TO OUTPUT	-78 dB~-68 dB

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.

13