|
| SPECIFICATIONS |
|
AMPLIFIER AND SPEAKER |
|
| |
Power | 65W RMS @ 4 Ω | ||
S/N Ratio | >115dB | ||
THD Power output, 20Hz to 20KHz | <0.1% | ||
Speaker | 8 Ω | ||
Tweeter type | Compression Dome | ||
Woofer | 10" | ||
FREQUENCY RESPONSE (Mic input to output) |
| ||
Line level o/p @ +4dBu into 600 Ω | 20Hz- 20KHz ±3dB | ||
Power amp o/p 1 watt into 8 Ω per side | 20Hz- 20KHz ±3dB | ||
SENSITIVITY @ LINE OUTPUT +4dBu with Master and Channels controls set to MID | |||
Mic/Line | |||
Tape in | |||
Max Input Level XLR | |||
Max Input Level 1/4" | +22dB | ||
MASTER EQUALIZATION |
|
| |
Low EQ | 100Hz ±15dB | ||
Mid EQ | 1.5KHz ±15dB | ||
Hi EQ | 10KHz ±15dB | ||
MICROPHONE PREAMP E.I.N. (150ohm Terminated, max. Gain) | |||
POWER REQUIREMENTS | |||
FUSING | 5x20mm glass type, 2.5A/250V for 115VAC, and 1.5A/250V for 230VAC operation, | ||
DIMENSIONS (H x W x D) | 20" x 13.5" x 13.5" (50.3 x 34.3 x 34.3cm) | ||
WEIGHT | 41 lbs. (18.6 Kg | ||
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.
7
