Napco Security Technologies GEM-DXK3 manual Central Station Monitoring, Communicator Features

CENTRAL STATION MONITORING

Your alarm specialist may have programmed your system to be monitored by a central station. The built-in digital communicator can transmit emergency signals and status reports to the central station 24 hours a day.

Communicator Features

Abort Delay. Ask your installer which of your zones have Abort Delay, a delay that enables you to reset the system before it communicates to the central station. Your system has a SIA CP-01 required Abort Delay of 30 seconds. It may be removed or increased up to 45 seconds (at your option) by consulting with your installer. Note: If an alarm signal is cancelled during the Abort De- lay or cancelled after the report is sent (and an acknowledgement of the can- cellation is received), a "C" will appear in the keypad window.

Regular Burglary (Non-24-Hour) Zone reports are aborted by disarming within the delay period.

24 - Hour Zones and zones programmed to report restores must be

restored first, then the panel armed and disarmed, all within the delay period.

Opening and/or Closing Reporting. Your system can notify the central station every time it is disarmed or armed. Any or all of up to 96 different users can each be

identified. If your system reports on arming (Closing Report), the central station will acknowledge arming. This will signal at the keypad as a “ringback” beep. Note: If the ringback signal is not heard, call for service.

20