Napco Security Technologies GEM-DXK3 manual Function Menu, Reset System Trouble?

FUNCTION MENU

09 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME

9.Reset System Trouble?

System troubles display and sound at the keypad. Correcting the trouble will clear most indications, however the following error codes will require manual reset: E11; E13; E19; E20 and E22. (See SYSTEM TROUBLE ERROR CODES for a description of error codes.)

10 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME

10.Reset Sensor Watch Failure (Sensor Watch programmed? ‰YES ‰NO).

Your system may have been programmed for Sensor Watch, a feature which supervises the motion sensors in the system. If a Sensor Watch failure occurs, a System Trouble E22-NN will result, where NN represents the zone number of the sensor in question. To reset, press Cto clear the display, enter the Function Menu, scroll to Reset Sensor Watch Failure and press U. If you cannot correct the problem, call for service

11 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME

11.Start Exit Time? (Optional) (Start Exit Time programmed? ‰YES ‰NO)

In Commercial Burglary systems, exit delay may have been programmed to start after a central-station “ringback” (verification) signal has been received. If the ringback tone has not been received within about 30 seconds after arming, a communication problem may exist. Use this function to start exit delay manually, then exit the premises immediately. Be sure to have your alarm specialist check communications with the central station as soon as possible.

17