Whirlpool RS6755XB, RS675PXB warranty The display shows “PF”

I PROBLEM Cooking resutts are not what you expected

The display shows “PF”

“Fl” or “F3” shows on the display

POSSIBLE CAUSE

The range is not level.

The oven temperature seems too low or too high.

Y’ou have not preheated the oven as the recipe calls for.

Tine recipe has never been tested or is not from a reliable source.

The pan used is not the type or size recommended in the recipe.

There is not proper (air clrcula- tion around pan when baking.

Cooking utensil does not fit the slJrface unit being used.

There has been a power failure.

SOLUTION

Level range. (See Installation Instruc- tions.)

Adjusting the oven temperature control. (See “Adjusting the oven temperature control” on page 14.)

Preheat oven when called for in recipe.

Use only tested recipes from a reliable source.

Refer to a reliable cookbook for recom- mended pan type and size.

Allow 1l/z to 2 inches (4-5 cm) of air space on all sides of pan. There must be a minimum space of 1 inch (2.5 cm).

Pan should be the same size or slightly larger than surface unit being used.

Reset the clock (See page 11.)

Call for service. (See Step 3 on page 38.)

37