6.Use the Hour and Minute pads to set the desired stop time. Push the “up”(A) or ‘down”
(V)pad(s) until the correct time shows on the display.
This example shows a desired stop time of 2:30. This provides a cook time of 30 m nutes (the difference between the start and stop times).
NOTE: If you do not set a stop time, the colon will flash on the display and STOP and COOK will flash atternately to remind you to program a stop time or a cook time. (See page 20 lor instructions on how to set delay start and stop automatically using Cook Time and Start Time.)
7.Push the Start/Enter pad. DELAY and EIAKE will light up on the display to show that the oven is programmed to start at a later time.
NOTE: The display will show “door” and a tone
will sound once a minute for 5 minutes il:the door is latched when you try to bake/roast.
You can change the temperature or time settings any time after pushing the Start/Enter pad by repeating just Steps 2 through 6
6.When the start time is reached, a
9.When the baking/roasting time is corn pleted, the oven will turn off automatically, beep four times and “End” will show on the display. You will also hear four 1seconcl tones every minute until you push the Off/Cancel pad.
NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds.
To cancel the MEALTIMER” control setting:
l Push the Off/Cancel pad to return the display to the time of day.
23
