FIRE PROTECTION
(Applicable only where local ordinance permits use of this alarm control panel for fire protection).
NN INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
Fire-Zone Alarm
If a fire is detected, the FIRE/TBL light will display with the zone number and the keypad sounder will pulse.
•If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire Department from an outside phone.
•If there is no evidence of a fire, enter your code and press J to silence the alarm.
•Check the smoke detector(s). If a smoke detector tripped, its red alarm indicator light will be on.
•After the alarm condition is corrected (thermostat cooled down; smoke cleared from detector; etc.), pressing Cagain will reset the keypad within about 10 seconds.
E INTERIOR BYPASS |
|
|
| |||||
|
|
|
|
|
| |||
|
|
|
|
|
|
| ||
|
|
|
|
| ||||
FIRE/TBL | SYS TBL | CHIME | ||||||
|
|
|
|
|
|
|
|
|
41 INTERIOR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
BYPASS | FIRE/TBL | SYS TBL | CHIME | |||||
|
|
|
|
|
|
|
|
|
NN INTERIOR |
|
|
|
|
| |||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |||
BYPASS | FIRE/TBL | SYS TBL | CHIME | |||||
Fire-Zone Trouble
•The system is constantly monitoring the Fire Zone(s) to insure they are in good working order.
•If a problem on a Fire Zone is detected, a system trouble E41 will display, followed by the number of the Fire Zone in trouble. The sounder will activate, the SYS TBL light will come on and the FIRE/TBL light will blink.
•Press the Cbutton to silence the sounder. Call for service immediately!
11
