Napoleon Fireplaces GDI-30P Operation / Maintenance, Mantle Width, Ae N I T G L H E T, Door Latch

8

DOOR OPERATION

The upper louvres must be removed to allow the door to be opened or closed. Release the top and bottom door latches, located at the right side of the door.

FIGURE 6

DOOR LATCH

MANTLE CLEARANCE

This can vary according to the mantle depth. Use the graph to help evaluate the clearance needed.

FIGURE 7

MH

AE N I T G L H E T

MANTLE WIDTH

OPERATION / MAINTENANCE

OPERATING INSTRUCTIONS

Purge all gas lines with the glass door open. Assure that a continuous gas flow is at the burner before clos- ing the door. Allow several minutes (5-15) for the flame to stabilize after ignition.

Do not operate the main burner of the in- sert with the door opened.

When lit for the first time, the fireplace will emit a slight odour for a few hours. This is a normal temporary con- dition caused by the "burn-in" of paints and lubricants used in the manufacturing process and will not occur again. Simply open a window to sufficiently ventilate the room. After extended periods of non-operation such as following a vacation or a warm weather season, the fireplace may emit a slight odour for a few hours. This is caused by dust particles in the heat exchanger burn- ing off. Open a window to sufficiently ventilate the room.

PURGE THE GAS LINE WITH THE GLASS DOOR OPEN.

W415-0384 / D / 09.13.05