4.3LOGO PLACEMENT
Remove the backing of the logo supplied. Centre the logo on the front of the appliance, ½” in from the left side, as shown.
½" | LO |
| GO |
4.4MEDIA
4.4.1Place lava or ember rock around the base of the appli- ance, making sure not to block any burner ports or valve access. Retain a small amount of lava rock for step 3 and if applicable step 4.
4.4.2Place formed charcoal lumps around the front and sides of the appliance.
4.4.3Use remaining lava or ember rock to blend with the char- coal lumps.
4.4.4GVFL30 ONLY: Sprinkle remaining lava rock onto the outer fibre ember beds to hide the seam.
13
½" | LOGO |
|
GVFL 18
GVFL 24
GVFL 30