4

2.0 INTRODUCTION

! WARNING

• THIS APPLIANCE IS HOT WHEN OPERATED AND CAN CAUSE SEVERE BURNS IF CONTACTED.

• ANY CHANGES TO THIS APPLIANCE OR ITS CONTROLS CAN BE DANGEROUS AND IS PROHIBITED.

• Under no circumstances should this appliance be modified.

• Do not operate appliance before reading and understanding operating instructions. Failure to operate appliance according to operating instructions could cause fire or injury.

• Risk of burns. The appliance should be turned off and cooled before servicing.

• Do not install damaged, incomplete or substitute components.

• Risk of cuts and abrasions. Wear protective gloves and safety glasses during installation. Sheet metal edges may be sharp.

• Provide adequate ventilation and combustion air. Provide adequate clearance for servicing and operating this appliance. Never obstruct the front opening of the appliance.

• If the appliance shuts off, do not re-light until you provide fresh air. If the appliance keeps shutting off, have it serviced. Keep burner and control compartment clean.

• Do not burn wood or other materials in this appliance.

• Young children should be carefully supervised when they are in the same room as the appliance. Toddlers, young children and others may be susceptible to accidental contact burns. A physical barrier is recommended if there are at risk individuals in the house. To restrict access to an appliance, install an adjustable safety gate to keep toddlers, young children and other at risk individuals out of the room and away from hot surfaces.

• Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies.

• Ensure you have incorporated adequate safety measures to protect infants/toddlers from touching hot surfaces.

• Clothing or other flammable material should not be placed on or near the appliance.

• Check with your local hearth specialty dealer for safety screens and hearth guards to protect children from hot surfaces. These screens and guards must be fastened to the floor.

• Any safety screen or guard removed for servicing must be replaced prior to operating the appliance.

• It is imperative that the control compartments, burners and circulating blower and its passageway in the appliance are kept clean. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding, material, etc. The appliance area must be kept clear and free from combustible materials, gasoline and other flammable vapours and liquids.

• Furniture or other objects must be kept a minimum 4 feet away from the front of the appliance.

• Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

• Do not allow fans to blow directly into the appliance. Avoid any drafts that alter burner flame patterns.

• Do not use a blower insert, heat exchanger insert or any other accessory not approved for use with this appliance.

• Carbon or soot should not occur in a vent free appliance as it can distribute into the living area of your home. If you notice any signs of carbon or soot, immediately turn off your appliance and arrange to have it serviced by a qualified technician before operating it again.

• Keep the packaging material out of reach of children and dispose of the material in a safe manner. As with all plastic bags, these are not toys and should be kept away from children and infants.

• As with any combustion appliance, we recommend having your appliance regularly inspected and serviced as well as having a Carbon Monoxide Detector installed in the same area to defend you and your family against Carbon Monoxide.

• The gas log appliance must be secured to the appliance floor to ensure that the position is not changed while adjusting the controls.

• Sooting and an improper burn may result from shifting of the gas logs by moving the appliance. A gas leak could be caused by moving the appliance.

• If you are installing the appliance into a sunken application, you must raise the appliance floor to allow access to the gas log controls. Raising the floor ensures adequate air flow and guards against sooting. The appliance floor must be raised using noncombustible materials.

• This appliance is for installation only in a solid-fuel burning masonry or UL 127 factory-built appliance or in a listed ventless firebox enclosure. It has been design certified for these installations. Exception: DO NOT install this appliance in a factory-built appliance that includes instructions stating it has not been tested or should not be used with unvented gas logs.

• This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

• A appliance screen must be in place when the appliance is operating and, unless other provisions for combustion air are provided, the screen shall have an opening for introduction of combustion air.

• State or local codes may only allow operation of this appliance in a vented configuration. Check your state or local codes.

3.12

W415-0809 / A / 05.10.10

Page 4
Image 4
Napoleon Fireplaces GVFL24P, GVFL30P, GVFL18P, GVFL24N, GVFL18N, GVFL30N manual Introduction

GVFL18N, GVFL18, GVFL24N, GVFL18P, GVFL30N specifications

Napoleon Fireplaces are renowned for their innovative designs and advanced heating technologies, and their GVFL series is no exception. The GVFL18P, GVFL24P, GVFL30, GVFL18N, and GVFL18 models are built to enhance any living space while providing efficient warmth and ambiance.

One of the standout features of these fireplaces is their advanced firebox technology, which maximizes heat output while minimizing heat loss. This means that even on the coldest winter nights, you can enjoy a cozy environment without excessive energy costs. The design of the GVFL series incorporates a large viewing area, allowing for a spectacular flame presentation that draws you into its warmth.

The GVFL18P and GVFL24P models are particularly versatile, designed for multi-room applications. They feature a powerful fan-forced air distribution system that promotes an even heat dispersion throughout your space, ensuring comfort in every corner. With adjustable flame settings, users can customize their experience from a gentle glow to a roaring fire, depending on mood and need.

For those seeking a more modern aesthetic, the GVFL30 boasts a sleek design with an array of finishing options that seamlessly fit contemporary interiors. This model highlights Napoleon’s commitment to both form and function, proving that style doesn't have to sacrifice performance.

In addition, the GVFL series incorporates reliable safety features, such as a heat sensor and automatic shut-off system. This gives homeowners peace of mind, knowing that their fireplace is not only efficient but also safe for family use.

The GVFL18N and GVFL18 are ideal for those who prefer a linear design that can complement various living styles. Both models emphasize simplicity and elegance while delivering powerful heating technology. Their compact size makes them suitable for snug spaces where traditional fireplaces may not fit, ensuring that homeowners can enjoy the beauty and warmth of a fireplace regardless of space limitations.

Moreover, Napoleon Fireplaces emphasize eco-friendliness, with models designed to burn cleanly and efficiently, adhering to regulations that reduce emissions. This environmentally conscious approach appeals to today’s customers who are increasingly aware of their carbon footprint.

In summary, the Napoleon Fireplaces GVFL18P, GVFL24P, GVFL30, GVFL18N, and GVFL18 represent a perfect blend of advanced technology, aesthetic appeal, and safety features. Ideal for any homeowner looking to enhance their living space with warmth and style, these models showcase Napoleon’s dedication to quality and innovation in fireplace design.