8
FINISHING
GLASS MEDIA INSTALLATION
WARNING! Glass embers may have sharp edges, wear safety glasses and gloves when handling.
Do not change or substitute the glass ember material provided with this fireplace. If replacing, use only replacement glass embers available from your local authorized dealer / distributor.
WARNING! Glass embers may have a fine oil residue that needs to be cleaned prior to installation. Clean the glass with mild dish soap, drain, rinse thoroughly and dry before installing
1.Carefully pour the appliance glass media onto the appliance log support as shown.
2.Spread the glass evenly over the pan burner. The distribution of clear glass over the burner pan will influence flame height.
OPTIONAL MKR ROCK INSTALLATION
WARNING! Real rocks must not be used in this appliance. Heat will cause them to explode.
1.Remove the glass media from your appliance.
2.Place the 4 notched rocks and 2 clusters on the edge of the burner pan as shown, making sure not to cover any ports.
3.Place the remaining refractory rocks on and around the burner as desired. (There are not set locations).
4.Spread the lava rock removed in Step 1 and evenly distribute it around the rocks.
Notched
Rock
www.napoleonfireplaces.com
