D-Link DSL-302G manual Installing the PC Ethernet Client Driver

Installing the PC (Ethernet Client) Driver

To install the PC (Ethernet Client) driver for a PC-attached configuration on a PC running Windows 98 SE/Windows 2000, follow the procedure below:

Note: If you have just installed the PC (USB) driver for a PC-attached Modem configuration, this procedure will automatically follow on from either of these procedures. The PC having initially detected the DSL-302G as a PC-attached USB device will now detect the DSL-302G as an Ethernet device.

Therefore, the Ethernet driver (VVB Client) now needs to be installed. If this procedure does not automatically follow, you need to reset your DSL-302G.

1.The Add New Hardware Wizard dialog box is displayed showing that it needs to install a driver for the VVB Ethernet port:

2.Click on Next to continue. The following dialog box is displayed asking you to specify how to install the driver:

3.Ensure that the first option is selected and click on Next. The following dialog box is displayed asking you to specify where the driver can be found: