8
LOG PLACEMENT
PHAZERTM logs, exclusive to Napoleon Fireplaces, pro- vide a unique and realistic glowing effect that is different in every installation. Use only certified PHAZERTM logs avail- able from your Napoleon / Wolf Steel Ltd. dealer.
POSITIONING THE LOGS IMPROPERLY WILL CAUSE
FLAME IMPINGEMENT AND CARBONING.
Position the logs as shown. All logs are numbered.
#1
FIGURE14a-d
A | LOCATING PIN | CENTRE SUPPORT | LOCATING PIN |
The rear log should be centred on the log support and rest against the rear wall.
#3 | #2 |
|
B |
Log #3 rests against the far left grate post and onto the locating pin on the centre support. Log #2 rests against the far right grate post and over the locating pin on the centre support and against the tip of log #3. NOTE:
Skewering log#2 onto the locating pin may be necessary.
#6 | #4 |
|
C |
Log (#6) has a leg that fits into an indentation on the top of log (#3). Log (#4) rests in the indentations on the tops of logs (#2) and (#1).
#7 | #5 |
|
D |
Logs (#5) and (#7) fit onto the indentations of the lower logs.
GLOWING EMBERS
Tear the embers into pieces and place along the front row of ports covering all of the burner area in front of logs (#2 & #3). Care should be taken to shred the embers into thin, small irregular pieces as only the exposed edges of the fibre hairs will glow. The ember material will only glow
when exposed to direct flame; however, care should be taken to not block the burner ports.
Blocked burner ports can cause an incorrect flame pattern, carbon deposits and delayed ignition. PHAZERTM logs glow when exposed to direct flame. Use only certified "glowing embers" and PHAZERTM logs available from your Napo- leon dealer.
DOOR INSTALLATION
Place the door into the two lower door brackets and secure at the top of the unit with two
FIGURE 15
LOWER DOOR BRACKETS
MANTLE CLEARANCE
This can vary according to the mantle depth. Use the graph to help evaluate the clearance needed.
MH | FIGURE 16 | |
A E | ||
|
NI T G L H E T
MANTLE WIDTH