USB 598 modem - User Guide
Note: Do not forcefully insert the modem. This may damage the connector pins.
Installing the modem and software
To install Watcher and the modem drivers:
1.If your computer has an AirPort®, AirPort Extreme®, AirPort Express®, or Bluetooth adapter, turn it off. (For instructions, see the user guide of your computer).
2.Remove the protective cap from the USB connector of the modem.
3.Gently insert the modem into the USB slot. Alternatively:
·You can attach the USB extension cable (included in your package) to your computer’s USB slot, connect the modem and laptop clip to the USB extension cable, and then attach the laptop clip to the top of your laptop’s screen (see page 19 through page 20).
Note: If your computer’s USB slot is vertical, use the supplied USB extension cable and laptop clip.
Do not insert the modem or the USB extension cable into a USB hub or, if your keyboard is separate from your laptop, a USB slot on your keyboard.
Warning: If the orientation of your computer’s USB slot or the thickness of your computer are such that pressure is applied to the modem’s end or side (as shown by the red circle in the drawing below), you may damage the modem or your computer. In such cases, do not insert the modem directly into your computer’s USB slot; use the supplied USB extension cable and the supplied laptop clip instead (see page 19).
4.In the window that appears, double‐click Watcher Installer.mpkg.
5.In the “Welcome to the Sierra Wireless Watcher Installer” window, click Continue.
|
|
|
|
|
|
|
18 |
|
|
|
|
| 2131141 |
|
|
|
