Activation
Activation Assistant
If your device is not activated, use the Activation Assistant:
1.From the Extras item on the Watcher menu, choose
Activation.
The Activation Assistant window is displayed.
2.Phone your service provider. Inform them that you are activating a Sierra Wireless wireless device.
3.Follow the instructions of your service provider to activate your device. Write down this information that your service provider gives you (depending on your service provider, some of the following items may not apply):
Activation code (MSL): ____________________________
USB 598 phone number (MDN):
_____________________________
MIN / IMSI_S (if not the same value as your MDN [above]):
_____________________________
MSID: _____________________________________________
4.To complete the activation process, enter the information (that you wrote down) into the fields on the screen, and click Activate.
5.Go through the rest of the Activation Assistant.
After your service provider sets up your account on the network, your device is activated.
6.If a window appears, prompting you to enter your password, enter your Mac password, then click OK.
7.If the New Port Configuration window appears, click Continue to automatically configure your computer to use your device.
8.Proceed to “Watcher window” on page 28.
|
|
|
|
|
|
|
Document 2131141. Rev | 1.0 | Feb.09 |
|
|
| 25 |
|
|
