LIGHTING INSTRUCTIONS
Open lid.
Ensuring burner controls are in the off position, turn on the gas supply valve.
CENTRE
BURNER
LEFT
BURNER
LIGHTING PORT | IGNITOR | REAR | RIGHT | |
BURNER | BURNER | |||
HOLES |
| |||
|
|
|
Back Burner Lighting
Remove warming rack.
Turn back burner control
to high position.
Press and hold igniter
button until lit, or light by
match.
If ignition is not immediate, turn the burner control off.
Wait 5 minutes.
Main Burner Lighting
Turn left burner control
to high position.
Press and hold igniter
button until lit, or light by
inserting a lit match
through a lighting hole.
If ignition is not immediate, turn the burner control off.
Wait 5 minutes.
With the left burner operat- ing in the high position, turn the centre burner to high, then the right burner to high.
Side Burner Lighting
Open burner cover.
Turn side burner control
to high position.
Push igniter several times
or light by holding a lit
match against the burner.
If ignition is not immedi-
ate, turn the burner control off. Wait 5 minutes.
The propane cylinder is equipped with an excess flow device. Unless all burners are turned off prior to turning the cylinder on, only small flames and low heat will be achievable.
Do not use back burner while operating left, centre or right burner.
6
